Interior wall coatings , also known as interior wall paints , include liquid and powder coatings, such as our common diatom mud, latex paints, etc. are interior wall coatings. The acceptance of interior wall paint is an indispensable procedure in the decoration process. If it is not carefully checked, it will be very troublesome after the check-in. Some friends may not be particularly clear about the acceptance criteria of your Nissin paint. Let's make a brief introduction to the decoration home decoration network for you to introduce to you in detail, I hope to help everyone!

Acceptance criteria for interior wall coatings:

First, check whether the type and color of the paint used meet the design and selected sample requirements, and whether it meets environmental protection standards.

Second, the acceptance of interior wall paint should start from the grassroots level. If it is not painted, it should be checked again. After painting, it should be checked again.

Third, when accepting the base layer of the wall, it is necessary to ensure that the wall is completely dry. The drying time should be determined according to the specific climatic conditions, and it is generally required to be placed for more than 10 days.

Fourth, we must ensure that the wall is flat. At least two times of putty should be scraped. If it still does not meet the standard, it should be scraped again to meet the requirements.

Fifth, when accepting the wall paint film, pay attention to the variety and color of the materials used for painting, and there must be no defects such as missing brush, powder, skin alkali, peeling and biting. If it is sprayed with a spray gun, it should be ensured that the spray point is evenly distributed, and there should be no skinning or falling phenomenon. The touch of the paint film is smooth and does not drop the powder.

Sixth, standing at a distance of 1.5 meters from the wall, confirm that there is no powder, blisters, peeling, bubbles, missing brushes, bottoming, anti-alkali, falling, chromatic aberration, etc. after painting. The brush is even, the brush pattern is smooth, and there is no obvious paint trace.

Seventh, straighten the 5 meter long line, check the decorative line and the color separation line, and the allowable error range is within 1-3mm.

Eighth, indoor doors and windows, lamps, etc. should be kept clean.

The above is the interior wall paint acceptance standard introduced by everyone in the decoration home decoration network. I hope that everyone will pay attention to the details during the acceptance, strictly check to avoid trouble after check-in. More exciting content, please pay attention to the decoration encyclopedia section!

More related wonderful reading:

How to construct interior wall paint? Interior wall coating construction technology

Which is better for exterior wall paint brands? Exterior wall paint brand ranking

What are the advantages and disadvantages of exterior wall coatings?

Interior wall coating basics

Basin Tap

Bestware Basin Tap brings the fine design and high technology together in all areas of the product process beyond Pull Out Faucet, Commercial Faucet and Commercial Kitchen Faucet. With extensive range of components, we can offer a large selection of both standard Pre-rinse Faucet and custom Mixer Tap units as well as flexible combination. Stainless steel is 100% recyclable and is comprised of over 60% recycled material, Bestware faucets are the perfect solution in the commercial and industry for better water quality and the circumvention of the development of deleterious substances and bacteria. No plating, no oxidizing, no rust, lead free.

Basin Tap,Bathroom Sink Taps,Bathroom Mixer Taps,Bathroom Basin Taps

Bestware Hardware Production Co., Ltd. , https://www.bestwarefaucets.com