The MCS-type drill is a new series of drills for CFRP (Carbon Fiber Reinforced Plastics) material hole drilling in the field of aviation and other industries based on the popular WSTAR drill bit. Since CFRP has high hardness and high strength with carbon fiber, the life of the Tool is extremely short. In addition, the multi-layer laminate structure causes problems such as delamination of the workpiece during hole processing. Depending on the processing location, composite sheet processing of CFRP and aluminum alloy sheets is also encountered. In this case, the machinability of the two is different, and processing becomes more difficult.

The MCS type drill adopts the specialized cutting edge design and multi-layer particle CVD diamond coating required for the processing of composite plate holes of CFRP, CFRP and aluminum alloy plates, achieving excellent hole machining accuracy and long tool life. In addition, Mitsubishi's own cooling hole shape has been used, which greatly improves the chip removal performance when processing composite plates of CFRP, CFRP and aluminum alloy plates, and achieves excellent machining accuracy.

MCS type drills mainly have the following characteristics:

1. The use of a low-resistance, sharp-cut wave blade prevents the delamination of CFRP, CFRP and aluminum alloy composite panels.

2. The unique multi-layer particle CVD diamond coating combines excellent wear resistance and smoothness to extend tool life.

3. TRI Cooling technology uses a unique cooling hole shape, which greatly improves the chip removal performance of CFRP, CFRP and aluminum alloy plate composite plates, and achieves excellent machining accuracy.

4. The product group includes eight models of the inch type 0.1719 (4.366mm) to 0.501 (12.725mm) commonly used for aircraft parts.

Cut-off Wheels

Cut-Off Wheels is a simplified product of thousands of impeller, mainly used in industrial production of polishing, is also a kind of industrial consumables products. The impeller matrix has mesh cloth, nylon, plastic, steel paper, etc., the number of pages varies, and is evenly distributed in fan shape. Particle size 36#-400#, 60#, 80# is the most common, the outer diameter of 4"-7" installed in the angular grinder, used for welding seam, positive edge burr grinding and grinding processing, can be interchangeable with the cymbal grinding wheel, has the advantages of good elasticity, high efficiency, good heat loss, low noise can replace the resin cymbal grinding wheel, it has strong elasticity, high tensile and bending strength, Good self-sharpening, high grinding rate, low noise, suitable for grinding the welding seam in the box and the flash edge of the stamping parts. It is mainly used for grinding and polishing of various stainless steel and carbon steel structural parts.

Cut-Off Wheels,Grinding Wheel,Disc For Angle Grinde,Flap Wheel

Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com