1. When the door and window are installed, the surface protective film of the profile should be peeled off and scrubbed clean; otherwise, the adhesive of the protective film will remain on the profile, clay, sticky ash, extremely unattractive, and difficult to be cleaned again. clean.

2. When the wind is blowing, the casement window sash should be closed in time.

3. Do not hang heavy objects on the door and window hardware.

4. Open the lower hanging window to achieve different opening by changing the direction of the handle opening, to understand how to operate, so as not to cause damage.

5. When sliding doors and windows are used, the push-pull track should be cleaned frequently to keep it clean so that no hard particles are present on the track surface and in the groove.

6. Plastic door and window products are provided with drainage and decompression system in the window frame, window sash, etc. to ensure the airtight performance and watertight performance of the door and window. When using the user, do not block the drainage hole and the air pressure balance hole of the door and window. In order to avoid the drainage performance of doors and windows, the rain in the snow and rain will cause infiltration, which will bring inconvenience to daily life and work.

7. When pushing and pulling the sliding window, the force point should be in the middle or lower position of the window sash, the push-pull effect is better, and the force should not be too strong when pushing and pulling, so as not to reduce the service life of the window sash.

8. When cleaning the yarn fan, the user should not remove the rubber strip of the fixed gauze and take off the gauze. Instead, remove the gauze as a whole and scrub with a water-soluble detergent and a soft cloth.

9. When the winter gauze fan is not in use, the user can remove the screen window and store it as needed. The gauze fan should be stored at a distance of 1 m away from the heat source. The flat or short side should be placed vertically, and no hard object pressure could be used to avoid deformation.

10. When using the screen fan of the sliding window, please pay attention to the vertical frame of the inner sliding fan to maintain good sealing.

Tabletop Peristaltic Pump

The Tabletop Peristaltic Pump has a small footprint and simple operation. The start and stop of the pump can be controlled by the pulse of a foot switch, and it can be used with a hose fixing bracket. The operation is simple, the filling accuracy is high, and various semi-automatic manual operations are used. Such as perfume, essential oil, electronic cigarette oil, nail polish, etc. Only one employee operation can achieve 20-30 fillings per minute. At the same time, two pump heads can be cascaded to achieve efficient filling by manual operation.

In the liquid filling process, the liquid is only transported through the hose, which is clean and hygienic. When the customer wants to replace other different types of liquid filling and does not want to affect the smell of the liquid, only a new hose can be easily replaced.

Tabletop Peristaltic Pump is an Ideal vials filling pump.

Tabletop Peristaltic Pump,Stepper Motor Peristaltic Pump,Flow Peristaltic Tube Pump,Liquid Peristaltic Pump

Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crperistalticpump.com