The range hood is an essential smoke removal appliance in the kitchen. When cooking every day, you need to turn on the range hood to remove the fumes from the kitchen. Over time, the oil net and the impeller of the hood are attached with a large amount of oil, which is neither beautiful nor affects the smoke exhausting effect. In most households, the regular cleaning of the hood has become one of the essential tasks in the kitchen cleaning, but the frequent removal of the hood has its drawbacks.

Increased noise life shortens the problem of cleaning and hood cleaning

When the range hood is working, the wind wheel is rotated at a high speed by the internal motor, and a negative pressure zone is formed in a certain space above the stove, and the indoor soot gas is sucked into the range hood, and the soot gas is filtered through the oil net for the first time. The secondary soot is separated, and then enters the inside of the hood duct, and the soot gas is separated for the second time by the rotation of the turbine. The soot in the wind cabinet is subjected to centrifugal force, the oil mist is integrated into the oil droplet, and the oil is collected through the oil passage. The cup, the purified flue gas is finally discharged along a fixed passage. From the working principle of the range hood, it is not difficult to see that the most directly de-oiled parts are the oil net and the impeller, which is also the focus of the range hood cleaning.

Destroy the decoration structure

Cleaning the range hood is not as simple as cleaning a normal electric appliance. If you want to clean it deeply, you have to disassemble it. Today's kitchens are all integrated. When you decorate, you first buy kitchen appliances, and then design the decoration style. The hood is embedded in the cabinet. There is almost no extra space reserved. If you disassemble it, you may scratch the cabinet or wall tile. , affecting the overall beauty of the kitchen.

Affect life

Every range hood is factory assembled, precision-assembled through the factory assembly line, and rigorously tested to ensure that the installation of key parts such as the range hood motor and turbine is in place. During the process of dismantling and washing, the parts are inevitably bumped, the protective coating of the key parts is worn out, and the corrosion resistance of the parts is greatly reduced, which will affect the service life of the product.

Affect performance

During the cleaning process, it is inevitable that the key components will be slightly deformed or not installed. These will increase the resistance of the machine. After repeated installation, it will easily cause problems such as increased product noise and reduced suction, which will affect normal use.