What are the suitable sizes of public sanitary partition materials?
In some public places, in order to make the environment more hygienic and tidy, and in order to facilitate people to use the toilet at ease, public toilets are generally installed in public places. However, the choice of partition materials when decorating public toilets is very critical, and the requirements for partition size are also very strict, so as to protect people's privacy. So, public toilet partition material, what does? Public toilet partition size much better? The next small series with a look at it! What are the materials for public health partitions 1. PVC board partition: The partition material of this public toilet mainly uses PVC raw materials, and then it is made into a honeycomb mesh structure. This is a vacuum plastic film, so it is widely used on the surface of various boards package. 2. Moisture-proof board partition: This kind of public sanitary partition material is made of multiple layers of special fiber materials. During the production, it should be saturated with phenolic resin, and then pressed by high temperature, and finally add some moisture-proof during the production process Particles, so that they do n’t swell even in water. 3. Artificial board partition: This kind of public sanitary partition material does not need joints or edge trimming, because it is a formed board, so it only needs to be directly used with hardware. The appearance of this kind of plate is beautiful and generous, and it also has the characteristics of crash resistance, stain resistance, and moisture resistance. 4. Tempered glass: This public sanitary partition material uses a physical or chemical method to make the surface of the glass can withstand the stress of the external force, so that the stress on the surface of the glass can be offset, so it has a certain bearing capacity, so it has good resistance Impact resistance and wind resistance. How appropriate is the size of public sanitary partition 1. The smallest public health partition size In public toilets in some public places, people in long lines can often be seen. For such a small toilet area, but the flow of people is large, you can rationally design the partition size of the toilet, a few more toilet positions. Generally, the minimum size of the public sanitary partition should be within 0.8 * 0.9m. If it is less than this value, it will be very depressed, and it is difficult to turn inside. 2. Standard public sanitary partition size If the area of ​​the public toilet is large enough, the partition size of the toilet can be set to the standard size, and the optimal public sanitary partition size is 1.2 * 0.9m. If the partition size exceeds this value, space will be wasted. 3. Other sizes of public sanitary partitions In Western countries, the size of the toilet is 1000 (W) × 1500 (D) × 2000 (H), the size of the squatting toilet is 1000 (W) × 1220 (D) × 2000 (H); The toilet size is 900 (W) × 1520 (D) × 2000 (H), and the size of the squatting toilet is 900 (W) × 1220 (D) × 2000 (H). Generally, the toilet will be equipped with a toilet, and it is also an independent unit space. The distance between the partition of the unit space and the door panel is about 100mm-150mm. Summary of the article: The above content is the relevant explanation of what the public health partition materials are and the size of the public health partitions. If you want to know more related content, you can pay attention to our website, and there will be more exciting content in the future. . What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
PVD (physical vapor deposition) coating is a type of Surface Treatment that is used to improve the performance of metal parts, by applying a thin layer of material onto the substrate through a vacuum chamber. This process provides a range of benefits, including increased hardness, improved wear resistance, and enhanced corrosion resistance.
PVD coatings are typically applied to metals such as stainless steel, titanium, and aluminum. They are particularly useful in applications where the substrate is subjected to high wear and tear, as the coatings help to reduce friction and limit the damage caused by abrasion. They are also used in the automotive industry to provide an aesthetic and functional finish to exterior parts.
PVD coatings can be tailored to meet specific application requirements, with a range of coating materials available, including titanium, chromium, and zirconium. These coatings can be deposited in a range of colors, such as black, gold, and silver, giving designers and manufacturers the flexibility to create parts with the desired appearance.
Another key benefit of PVD coating is its durability. The thin layer of coating can offer a long-lasting, high-performance finish, even in harsh or corrosive environments. This makes them particularly useful in outdoor applications, and in settings such as aerospace and medical devices, where reliability and durability are critical.
PVD coating is applied through a series of steps, including cleaning and pre-treatment of the substrate, coating material deposition, and post-treatment, such as polishing or annealing. The result is a thin, uniform layer of coating that provides a range of functional and aesthetic benefits.
In conclusion, PVD coating is a versatile and effective surface treatment for metal parts. It offers a range of benefits, including improved hardness, wear resistance, and corrosion resistance, as well as aesthetic options. By enhancing the performance and durability of metal parts, PVD coating plays an important role in improving the reliability and efficiency of a range of industries and applications.
Pvd Process,Pvd Coating Process,Pvd Metal,Pvd Vacuum Plated Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lzautoindust.com