One: Prepare. The environment and painting tools must be cleaned when painting, and the operator should wear clean overalls and a clean work cap.

诀窍 2: Pre-dusting. First of all, the surface of the wood should be polished and smoothed, and the floating ash should be treated. When cleaning, a special dust-removing cloth can be used, and a large area (such as a ground plate) can be repeatedly vacuumed by a vacuum cleaner.

诀窍 three: humidity control. When the ambient humidity is greater than 85%, it is not suitable for construction, otherwise it will easily cause whitening and other defects.

诀窍 Four: coating grasp. The paint should be thin and not thick, and can be carried out in a thin layer. When doing multi-layer coating construction, each application should be applied after the lower layer is dry and polished.

诀窍5: It varies from material to material. Understand the wood of wood, if it is hard wood (such as teak, eucalyptus, Bengals) should be used with caution putty, foaming water, etc. to avoid discoloration and affect adhesion. For hard wood, if you want to get the best effect, you can paint directly. If you need to fill the gap, it is recommended to mix it with paint and fine wood powder. If it is general wood, if you need to use transparent putty as the substrate, you should use it first. The scraper is evenly applied to the entire base layer. It should be thin and not thick. After drying, the grinding should be uniform and the excess transparent putty attached to the surface of the wood should be thoroughly polished to avoid lacquering.

诀窍 Six: Suitable temperature construction. When the temperature drops below 5 °C, the drying time will be prolonged. At the same time, if the temperature is too low, white fog or matting will occur. Therefore, it should be avoided in this case. Avoid direct sunlight or high temperature operation. If the temperature is too high, the paint will dry quickly. Pinholes or air bubbles are also generated, so high temperature construction should also be avoided as much as possible.

Custom Woodgrain Vinyl

Yuquan vinyl film manufacturer accept Custom Woodgrain Vinyl order for typical design client own pattern for different purpose like lamiante PVC wooden sheet without glue, design for specific cabinets and furniture.

Custom Woodgrain Vinyl,Custom Wood Grain Alkenyl,Best Custom Woodgrain Vinyl,Custom Woodgrain Vinyl For Sale

Guangzhou Yuquan Composite Material Co., Ltd , http://www.klyqfilm.com