Weapon: In the fall, the weather is getting colder and the air is getting drier. When installing the floor, pay attention to read the manufacturer's installation requirements. First, sprinkle water on the ground within ten days before floor installation. Second, after the cement mortar flattened the ground, install the floor for 30 days after ventilation. This is to ensure that the floor humidity meets the requirements for installing the floor. At the same time, the moisture content of the floor will decrease as the moisture content in the air decreases. → Related Links: Fall: laying a good time on the floor

In the process of reducing the moisture content of the floor, the floor will shrink naturally due to the loss of moisture of the wood fiber, so the physical phenomenon of the wet expansion and contraction of the floor is unavoidable. If the moisture content is too low, it will directly cause cracks in the floor. Humidifiers, slightly moist mops, etc. can be used to humidify the interior to reduce the loss rate of the floor moisture content.

In addition, the weather in the north has more wind and sand in the autumn, and the floor needs frequent dust removal. Usually, the dust can be removed with a broom or a vacuum cleaner. The place where you often step on is even more diligent in vacuuming. Pay special attention to the hallway and the walkway leading to the outside. To prevent dust from entering the house, place dust-proof pads in the entry area.

Reminder: Some businesses vigorously promote "free glue", saying that the floor glue used during installation contains formaldehyde and is not environmentally friendly.

In fact, the main purpose of glue is to prevent moisture. Consumers often use wet mops or rags to wipe the floor when cleaning the floor. The seams between boards and boards are prone to water or moisture. Long-term moisture entry is bound to occur. Affect the life of the floor.

Flooring cement humidifier formaldehyde

PVC Gabion

It is made from high grade Low Carbon steel iron wire, heavy zinc coated wire, PVC coated wire though twisting and braiding by machine. as well as galfan coated units. Galfan is a high performance galvanising process using a zinc/aluminium/mischmetal alloy coating. This offers significantly greater protection than traditional zinc galvanizing. Where the product is exposed to water courses or a saline environment, we strongly recommends a polymer coated galvanized unit for improved design life.

Pvc Gabion,Pvc Coated Gabions,Gabions Mesh Galvanised Wire,Pvc Coated Gabion Mesh Box

Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdpvcwire.com