Brief content: The other type is a single-handle ceramic plate sealed thermostat nozzle. The seal is made of a new type of hot and cold water mixed ceramic valve core. The single handle controls the water output and water temperature of the faucet. The operation is more convenient. Comfortable.

Easy to use single-handle faucet: There are two main types of household bathroom faucets currently used - one is a double-handle ceramic piece sealing faucet, which is modified on the basis of the original rubber pad sealing faucet, and its sealing parts are precision-machined. Mirror ceramic sheet, etc., high hardness, good sealing performance and long service life; the other type is single handle ceramic sheet sealing thermostat nozzle, the seal is made of a new type of hot and cold water mixed ceramic sheet valve core, when used The single handle controls the water output and water temperature of the faucet, making the operation more convenient and comfortable.

Look at the appearance of the faucet plating surface should be uniform gloss, pay attention to whether there are defects such as peeling, cracking, charring, peeling off, black spots and pitting; the surface of the spray should be fine, smooth and uniform, pay attention to whether there is hanging, exposed, etc. defect. These defects will directly affect the service life of the faucet.

The faucet must be matched with the structural dimensions of the sanitary ware. The sink and the washing trough are usually divided into single holes, double holes and three holes. The hole spacing is: 100mm, 150mm, 200mm, and the matching faucet should be selected.

Concerned about surprises

Tag: Ceramic sheet Seals Handle Spool Water output

Previous: Winter water pipe freezing response Next: The type of hinges and installation points

Fiberglass Backing Pad

Flap Disc Backing Pad Specification:

Material: High Purity Fiberglass Cloth with Phenolic Resin

Surface: Black Paper, OEM Label

Type: T27, T28, T29.

Size: 75mm, 85mm, 90mm, 95mm, 107mm, 117mm, 140mm, 220mm

Layers: Normally it ranges from 6-12 layers, or as customers` requirements.

1. Our Flap Disc backing pad uses stamping method, makes our fiberglass backing pad size more accurate and concentricity better

2. The flap disc backing Inspect all products, to maximize the rate of standard product

3. The fiberglass backing pad is thicker, which is beneficial to increase the synchronous consumption of the flap disc

4. The fiberglass backing pad has more micro space to make the resin deeper import, and the Sanding Belt is easier to fit on the fiberglass backing pad

5. This Nylon fiber backing pad use dense glass fiber mesh cloth, the surface of the fiberglass backing pad is more smooth and beautiful than similar products

The Fiberglass backing pad is Suitable for: Abrasive Flap Disc , Clean And Strip Disc , nylon fllap wheels,

The related abrasive products we can supply is Flap Disc Adhesive , Bonded Abrasives , and Buffing And Polishing products, such as Cotton Buffing Wheels and Sanding Sponge , if you have any needs about abrasive tools, please kindly feel free to contact us.

Packaging Details for Fiberglass backing plate:

1. 20-50pcs wrapped with polyethylene film,

2. 250-1000pcs into boxes or cartons

3. 20-40 cartons are packaged on one pallet.

4. Usually about 250 000-350 000pcs per 20" conainer,

about 400 000-650 000pcs per 40" conainer.

about 1 000 000 pcs per railway wagon.

Fiberglass Backing Pad,Fiber Glass Backing,fiberglass back pad for flap disc,Flap Wheel Backing Pad,fiber glass back pad

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.abrasive-jd.com