| Home>Bearing knowledge>How to protect pump bearings |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
How to protect the pump bearing
Source: China Bearing Network Time: 2014-08-09
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1) Newly used water pump; usually replace the smooth grease (oil) after 100 hours of operation; replace it once every 500 hours in the future.
2) Select smooth bearing with smooth grease; after running for 1500 hours; replace the smooth grease; the amount of oil added may not be too much or too little; too much or too little smooth grease will cause the bearing to heat up; The volume of the bearing chamber is 1/2~2/3.
3) Regarding the selection of smooth oil smooth bearings; the amount of oil should be added to the regular orientation.
4) The container with smooth oil or smooth grease should be clean; it should be sealed normally; there should be no dust, iron filings, etc.; avoid damage to the bearing.
5) Motor bearings usually use sodium-based smooth grease; this smooth grease is characterized by high temperature (125 ° C); but it is easy to dissolve in water; so it can not be used for the smoothness of water pump bearings.
Recommend to friends comments close window
| Bearing related knowledge |
The related matters of measuring the radial clearance of the bearing are unique. The details of the fan bearing that can be purchased on the market identify the bearing layout. What are the reasons for the bearing oscillation?
Bicycle bearing protection; protection; device
|
This article links to http://
Please indicate the bearing network http://
Previous: Timken Bearings in the cement occupation of the next program: summer, the use of smooth oil, the more sticky, the better?
Sensor Bulb
Jiangmen Duramp Electric Co., Ltd , https://www.durampled.com