| Home>Bearing knowledge>Several common bearing damage treatment methods |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Several common bearing damage treatment methods
Source: China Bearing Network Time: 2014-02-18
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1 peeling off the size of the load and re-exploring the bearing improvement equipment method to improve the sealing equipment, stop rust.
Use a smoothing agent of the right viscosity to improve the smoothness.
View the accuracy of the shaft and bearing housing.
View the clearance.
2 peeling selection smoothing agent to improve the sealing equipment to improve the surface finish of the tumble parts.
3 card injury to view the size of the load.
Preload should be appropriate.
Improve the smoothing agent and smooth method.
View the accuracy of the shaft and bearing housing.
4 scratches improve pre-pressure to improve bearing clearance using oil film good smoothing agent to improve the smooth method to improve the sealing equipment 5 cracking equipment improvement method (select hot loading; use the appropriate things folder).
Correct the load conditions.
The bearing equipment is in place; the rib is supported.
6 crack, crack interference is appropriate.
View load conditions.
Improve equipment methods.
The shape of the shaft should be appropriate.
Holder damage inspection device approach.
View load; rotation and temperature conditions.
Falling oscillations.
Correct the selection of the cage.
Change the smoothing agent and smooth method.
7 indentation impact bushings.
Improve sealing equipment.
Filter smooth oil.
Improve assembly and application methods.
Pear skin pitting corrosion improvement sealing equipment.
Sufficient filter smooth oil.
Use a suitable smoothing agent.
8 wear improved sealing equipment.
Clear the bearing housing.
Sufficient filter smooth oil.
Check out the smoothing agent and smooth method.
Avoid non-linearity.
9 creep to see the excess;
Implement a stop-and-go method.
Properly tighten the adapter sleeve.
Discuss the accuracy of the shaft and bearing housing.
Axial preloading.
The side of the raceway wheel is fastened.
Bonding cooperation surface.
Apply a smoothing agent to the cooperating surface.
10 rust, corrosion improvement sealing equipment.
Discuss the sleek approach.
Anti-rust method when stopping.
Improve the custody method.
Pay attention when using it.
Recommend to friends comments close window
| Bearing related knowledge |
The characteristics of the bearing die-casting method are analyzed. The method of reducing the bearing noise. The packaging method of the tapered roller bearing is a detailed analysis of the "term explanation" of the rolling bearing.
High quality tapered roller bearing 32007X
|
This article links to http://
Please indicate the bearing network http://
Previous:How to avoid bearing rust Next:Repair the grinder static pressure imported bearings
9pcs Torx Key Set
Torx Key Set,Torx Hex Key,Torx Hex Key Set,Torx Allen Key Set
henan horn tools co.,ltd. , https://www.hornhandtools.com