Tile purchase and construction questions and answers (1)
1. How to determine the color of the kick line? 2. How long does it take for a tile to be covered? 3, paving tiles do not want to leave seams? 4. Is it necessary to wax the finished tiles? What is the benefit of doing this? 5. Which of the following is the quality standard for the smoothness of paving bricks? 6. Will the tiles be soaked before laying? I intend to invite the company to say that 600*600 or more do not have to say that you should be a floor tile, tiles do not soak, direct paving! How much of the specifications do not use! Low water absorption, soaked or not no difference! 7, there is a problem, said after paving the tiles with a wooden board against the wall, if there is a problem relying on the word Mi, this sentence is what it means. 8, how to choose the tiles according to the color of the house? 9. Does the color on the tiles fade over time? Does a typical tile have bleeding/coloring or uneven color? Tiles Tile Furniture Tile Specifications Is white brick with a white wall suitable? If nothing is used in the kitchen, because of the color of the cabinets, if the color of the accessories used in the bathroom is good, otherwise the whole color will be too light, giving a feeling of drift. Is the floor tile excellent? Or is A class good? Now with A level or the letter AA, AAA is relatively chaotic, and now it is still the quality of display tiles with excellent grades. Each manufacturer has its own labeler... Cracks in the vitrified tiles, can not be repaired by what? Another paint on the brick, how to remove the traces? There is no way to repair the crack, or to remove the cracked brick resurfacing, in addition to no other way, paint The problem you can try with toothpaste or Amway tile cleaner! How to choose bathroom tiles? Turned in the market, but do not understand, too many varieties, do not know the difference, it seems there are two kinds of glazed tiles and glass transition, what is the difference? excellent... The one that I sold to recommend is a matt, I don't particularly like it. Or, can this tile be laid directly on the ground? Kitchen tiles are best used matt, mainly matt anti-skid properties better! It is best not to use bricks to do wall tiles, because the wall tiles of water absorption standards and flexural strength indicators than the floor tiles to be worse! I am now Want to understand whether the tiles and the polished tiles are the same thing, whether the shop has any bad influence on the human body? The vitrified tiles are the all-ceramic polished tiles,... Buying tiles is not the same as buying the clothes we usually buy. The clothes are unsuitable for replacement. However, if you choose a problem with the tiles, it will bring a lot of trouble to the decoration. Therefore, it is not enough to know the types and characteristics of tiles, but also how to choose tiles. In ancient times, doctors wanted to see, smell, ask, and cut. There were also tips for choosing ceramic tiles. To buy ceramic tiles, one had to look, chant, listen, spell, and try. Here's a brief explanation of the five methods: Look: It's mainly careful. Check the surface of the tile is ... Are you a newbie? Is there a headache for choosing a tile? Don't worry, here's an expert for you to support: buy tiles simple skills first, check the certificate. When purchasing stone and building ceramics products in the building materials market, they must ask the distributors for radioactivity testing reports. They should pay attention to whether the report is original, whether the name of the business name in the report is consistent with the name of the purchased product, and whether there is a test result category. Second, try the weight. Good quality tile components are relatively heavy,...
The structure of the core barrel is generally divided into single - acting double core tube and most of the fishing apparatus. The double tube section consists of an outer tube assembly and an inner tube assembly. The outer pipe assembly includes; The main structure and working principle of the cartridge stopper, cartridge chamber, stable joint outer pipe, diamond reamer and diamond bit are as follows:
(1) Spear structure is composed of spear head and recovery spring. When coring, the fishing device is lowered to the upper part of the inner tube assembly in the drill pipe, and the fishing hook grasps the fishing spear, lifts the fishing device up, picks up the recycling card barrel, and inwardly compressing the cartridge card, so that the inner tube assembly and the outer tube are separated, so that the inner tube assembly is lifted up.
(2) The clip structure is mainly composed of the clip frame, clip, spring and other components. Its function is that when the inner tube sits on the outer tube, the clip expands with the help of the elastic force of the expansion spring and sticks to the inner wall of the clip chamber, so that the drilling tool can achieve positioning.
(3) Buffer structure by spring, locking mother, split pin composition. Protecting the inner tube when pulling the core.
(4) Single action structure is realized by two pairs of thrust bearings.
(5) Adjust the length of the inner pipe assembly and the outer pipe assembly of the structure, and fine-tune the lower shaft and the locking mother to achieve the gap required by the end of the spring seat and the step inside the drill bit.
(6) The fishing structure, also known as the fishing device, is mainly composed of fishing hook, hammer and safety rope. The fishing hook is used to hold the spearhead while fishing the inner pipe, and the weight is used to speed up the fishing device's descent to save fishing time. The safety rope is a thin rope. When the inner pipe is stuck for some reason and cannot be lifted, the safety rope can be forcefully lifted and then the drill can be lifted.
Choosing the color of the kick line is generally the main consideration of the color of the floor and the wall. If you choose to tile the floor tile, it is best to distinguish some from the ground color!
The glazed wall tiles need to be soaked before laying, and the water soaking time is based on the time that the tiles are completely soaked in water without bubbles. In general, it will be twenty to thirty minutes.
It is advisable to leave the seams, mainly because of preventing the thermal expansion and contraction of the tiles and causing the tiles to crack and reduce the service life of the tiles. General wall tiles left 1-1.5mm on it. Special effects can increase the distance to stay.
Before the paving of the vitrified tile, it is checked whether wax has been applied. If there is no wax, the paving after waxing is required. The effect of waxing is mainly to improve the anti-fouling performance of the tile. After the tiles are finished, it is necessary to polish the wax layer on the surface to increase the smooth and clean surface of the tiles.
The national standard is +/- 0.2%, which is the length of the brick (in millimeters) *+/-0.2%!
This should refer to the problem of checking the flatness of the tiles. The planks should be very flat feet, and the straight planks should be laid horizontally, vertically and in two directions so that a “m†is formed. Mainly to check the tile flatness problem!
The main considerations are: lighting, wall color, furniture color, family members, etc. to consider comprehensively, in order to pursue the overall style of the same!
The color of the tiles is generally not discolored! But for a long time, some stains may appear old. This kind of main vitrified tile is easier to appear.
Bleeding/coloring or uneven color:
There will be such problems, mainly due to the unsatisfactory anti-fouling treatment of vitrified tiles, which will cause the low profile of bricks to leak through the brick surface! 
Previous
Buy a tile knock two test three scratch four look Next
Tile purchase and construction questions and answers (2) 
submit
Other Parts,Spearhead Base,Compression Spin,Core Lifter
WUXI XINZUAN GEOLOGICAL EQUIPMENT CO.,LTD. , https://www.wxsmrxz.com