Model NO.: HX350
Trademark: HX
Origin: China
HS Code: 8202391000
Model NO.: HX350
Trademark: HX
Origin: China
HS Code: 8202391000
Product Description
Â
Â
Whats is the advantage of jewellery cutting diamond tools ?
01) Hot Pressed Sintered technology,Ultra-thin segment design.
02) Turbo-special edge, new segment technology.
03) More improve the cutting effect of blade.
04) Two sides reinforced flange results in more secure.
05) Increase the cooling holes, the service life, the better cooling!
06) Quality: SUPER PREMIUM
07) High-precision cutting, superfine while quick cut in porcelain.
08) High-efficiency cutting,super fast and extremely clean cut,Â
09) Longer life, less dust-and low noise
10) Produce by our own synthetic diamond,purity can up to 99.9%,
11) 26 years of production experience.
Product description
Hot pressed superthin diamond turbo blade is a new type mesh diamond saw blade,Especially suitable for cutting ceramic, porcelain, vitrified tile,granite, stoneware, hard tile and so on stone marterils.
Production process
Powder and admixture powder; Mixing synthetic diamond; Compression molding; sintering ;
Sharpen new blade edge; Leveling; Polishing; Painting; Packing.
Â
Most popular hnhongxiang saw blade jewellery cutting diamond tools |
Diameter |
Bore |
Thickness |
Cutting edge height |
Inch |
mm |
mm |
mm |
mm |
4" |
105 |
20/22.23 |
1.2 |
10 |
4.5" |
115 |
22.23 |
1.2 |
10 |
5" |
125 |
22.23 |
1.2 |
10 |
7" |
175 |
22.23 |
1.4 |
10 |
Share with you about jewellery cutting diamond tools essentials
1.The worker should be wear protective equipment before the operation.
Such as safety shoes,safety glasses, helmets, Kneepad,safety colthes,and so on.
2. Before used diamond blade should check diamond blade,whether or not have crack on it.
3. Install diamond blade,you should make mark of blade with same with cutting machine.
Do not same direct will lead to can not cutting.
4. When used wet cutting blade,should give more water on it.
5. Smooth cut, should keep balance when you cut into tile.
6. Reasonable cutting depth,need to adjust the depth of cutting machine,the best way is just to cut through the thickness of the tile,donot cutting tile with too depth.
with reasonable cutting depth, cutting depth before cutting adjust cutting machine, is best, should not be too deep.
Â
Packaging & Shipping
Â
Package of jewellery cutting diamond tools
Â
We will use carton package, and also can support your requirement if you need carton or other kind of package. of cause will add a little fees.
We support express, air way, and by sea shipping.
Company Information
Â
Zhecheng Hongxiang Superhard Material Co., Ltd. affiliated with Wanke Group, is a highly professional and experienced manufacturer of synthetic diamond powder & diamond tools in China. We have specialized in this field over 27 Years and always dedicated to the produce the diamond tools in high quality and reasonable prices.
Why choose us?Â
1. Since 1990, with over 27 years diamond tools manufacturer experience.Â
2. Rich experience in OEM order.Â
3. Advanced production equipment.Â
4. Own design team, can help you custom the packaging.Â
5. Own provincial engineering technology center.Â
6. D&B and ISO9001 Certificates
We are a professional synthetic diamond powder & diamond tools company integrating development, production and sales. Factory located in middle of China-Henan, with more than 124000 square meters. "High quality products, competitive prices, and classic services" is the soul of our business.Â
Warmly welcome all partners to join us for mutual benefits cooperation.
Product Description
Â
Â
Whats is the advantage of jewellery cutting diamond tools ?
01) Hot Pressed Sintered technology,Ultra-thin segment design.
02) Turbo-special edge, new segment technology.
03) More improve the cutting effect of blade.
04) Two sides reinforced flange results in more secure.
05) Increase the cooling holes, the service life, the better cooling!
06) Quality: SUPER PREMIUM
07) High-precision cutting, superfine while quick cut in porcelain.
08) High-efficiency cutting,super fast and extremely clean cut,Â
09) Longer life, less dust-and low noise
10) Produce by our own synthetic diamond,purity can up to 99.9%,
11) 26 years of production experience.
Product description
Hot pressed superthin diamond turbo blade is a new type mesh diamond saw blade,Especially suitable for cutting ceramic, porcelain, vitrified tile,granite, stoneware, hard tile and so on stone marterils.
Production process
Powder and admixture powder; Mixing synthetic diamond; Compression molding; sintering ;
Sharpen new blade edge; Leveling; Polishing; Painting; Packing.
Â
Most popular hnhongxiang saw blade jewellery cutting diamond tools |
Diameter |
Bore |
Thickness |
Cutting edge height |
Inch |
mm |
mm |
mm |
mm |
4" |
105 |
20/22.23 |
1.2 |
10 |
4.5" |
115 |
22.23 |
1.2 |
10 |
5" |
125 |
22.23 |
1.2 |
10 |
7" |
175 |
22.23 |
1.4 |
10 |
Share with you about jewellery cutting diamond tools essentials
1.The worker should be wear protective equipment before the operation.
Such as safety shoes,safety glasses, helmets, Kneepad,safety colthes,and so on.
2. Before used diamond blade should check diamond blade,whether or not have crack on it.
3. Install diamond blade,you should make mark of blade with same with cutting machine.
Do not same direct will lead to can not cutting.
4. When used wet cutting blade,should give more water on it.
5. Smooth cut, should keep balance when you cut into tile.
6. Reasonable cutting depth,need to adjust the depth of cutting machine,the best way is just to cut through the thickness of the tile,donot cutting tile with too depth.
with reasonable cutting depth, cutting depth before cutting adjust cutting machine, is best, should not be too deep.
Â
Packaging & Shipping
Â
Package of jewellery cutting diamond tools
Â
We will use carton package, and also can support your requirement if you need carton or other kind of package. of cause will add a little fees.
We support express, air way, and by sea shipping.
Company Information
Â
Zhecheng Hongxiang Superhard Material Co., Ltd. affiliated with Wanke Group, is a highly professional and experienced manufacturer of synthetic diamond powder & diamond tools in China. We have specialized in this field over 27 Years and always dedicated to the produce the diamond tools in high quality and reasonable prices.
Why choose us?Â
1. Since 1990, with over 27 years diamond tools manufacturer experience.Â
2. Rich experience in OEM order.Â
3. Advanced production equipment.Â
4. Own design team, can help you custom the packaging.Â
5. Own provincial engineering technology center.Â
6. D&B and ISO9001 Certificates
We are a professional synthetic diamond powder & diamond tools company integrating development, production and sales. Factory located in middle of China-Henan, with more than 124000 square meters. "High quality products, competitive prices, and classic services" is the soul of our business.Â
Warmly welcome all partners to join us for mutual benefits cooperation.
DIY Tool Cabinets
DIY tool cabinets are super hot online and they have mail order packings for safety in delivery.
Diy Tool Chest,Diy Tool Cabinets,Diy Mobile Tool Cabinet,Diy Tool Storage Cabinet
Changzhou Xingsheng Tianhe Electric Appliance Co., Ltd , https://www.roller-tool-cabinet.com