Many homeowners feel that they can feel at ease after their new home is renovated. Actually, the most important thing is to check and accept the house after the renovation of the new house. How do you check and accept the house ? Below with Xiaobian to learn together!

How to check the acceptance of the house

First, the wall surface

1. The acceptance of the house should first check the wall to see if there is cracking.

2. Secondly, check whether there is empty drum on the wall. You can tap on the wall with a small wooden hammer. If you send a crisp and unreal sound, it means that there is a problem of empty walls. Then you have to mark it and use it again. Putty filling.

3. When inspecting the walls, pay attention to checking whether the wall putty is a waterproof putty. The specific approach is: You can use a bottle of mineral water to splash water on the wall and touch it with your hands to see if the hands will be stained with mud. If not, it proves that the quality of the water-resistant putty on the wall is acceptable.

Second, the roof

1, check whether the roof decoration is qualified, the most important thing is to see if the roof cracking.

2. The second is to check if the yin and yang corners of the roof and wall are the same level.

Third, the ground

1, the ground is also a very important part of the acceptance of new houses, mainly to check whether the formation of the ground.

2. Check whether there is cracking on the ground and whether sand will appear on the ground with the ankle. If this happens, then there is a problem with the floor material.

Fourth, doors and windows

The main purpose of doors and windows is to test its durability and functionality. The details can be seen from the details of the doors and windows:

1. First, push and pull windows and doors to be smooth, smooth surface, no scratches.

2. Second, we must also pay attention to the detection of hardware accessories and doors and windows, accessories are complete, the location is correct and firm.

3. Door and window acceptance should also pay attention to its sealability, whether there is any obvious gap between the fan and the box when the doors and windows are closed, and whether the door frame or window frame is vertical.

Fifth, the circuit

1. The circuit can be said to be the most important job for house acceptance. First, it is necessary to check whether the positions of the socket and the switch are installed properly and whether the use is safe and reasonable.

2. Secondly, check whether each switch and power outlet can be used normally. Just plug in the phone and see if the outlet is powered on.

Sixth, heating system

Finally, the heating system also needs to be carefully inspected. If the heating system is not done well, when the household starts heating, it may cause troubles such as dirty walls, insufficient heating, and damaged furniture. Therefore, the specific inspection method is: the heating pipe pressure test to ensure that the gas pressure of the heating pipe is large enough, wait for 24 hours and then check whether there is leakage.

Xiao Bian Quotations: The contents on how to check the acceptance of the house are introduced here. I hope everyone can learn from the acceptance of the new house. Finally remind everyone that the acceptance process is very important, every place must be very careful, do not be sloppy.

Acceptance of the house

Laser product

EDAWELD Co., Ltd. professional produce Laser products,laser nozzles,laser tips. We main produce two kinds of laser products, TRUMPF Nozzle and MAZAK Nozzle. The form and size of the nozzle nozzle selection of great influence on the cutting quality,There are three main forms of nozzle: parallel, convergent and cone form. Our laser nozzles are made by imported high-quality copper and use superb CNC technology. So they got bright surface and cutting speed, less wear and tear, as compared with the original parts, we can reach 90%. But our low prices, it is worth buying.

Trumpf Laser Nozzle, Mazak Laser Nozzle, Laser Cutting Nozzles

EDAWELD COMPANY LIMITED , https://www.jsedaweld.com