Application and pressure of copper gasket
Copper gasket application copper gasket hardness copper gasket use pressure Taian Haitian Rubber Plastic Nylon Products Co., Ltd. Copper gasket application Copper gasket hardness Copper gasket pressure
Plain Particle Board is mainly used for furniture and carriage of bus, train.The bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.Melamine paper is the most popular to be as the face board, it is abrasion resistant, heat resistant, fouling resistant, clean is simple.The Engineering wood is also as the face and back surface. It is more cheaper and beautiful, can reach the same wood grain effect as the veneer surface.And we have High Quality Particle Board .LULI Group Co. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Plywood , venner, MDF, Particle board , Door skin , Blockboard , Finger joint board, OSB, paper, Steel etc.And we have Plain High-density Particle Board and Plain Chipboard Board
Plain Particle Board Details:
size:1220*2440MM 1250*2000MM 1525*2440MM 1830*2440MM
THICKNESS:9MM-40MM
MATERIAL:POPLAR, COMBINE, PINE
GLUE:E0, E1, E2
CERTIFICATION:CARB, FSC, CE
Tai'an Haitian Rubber & Plastic Nylon Products Co., Ltd.
Copper gasket
1. The effect of solid copper gasket on the vacuum flange is outstanding;
2. The softness of the copper gasket can fill the unevenness of the flange surface;
3. Copper gaskets are easy to process and can be produced in any size and type.
description:
Copper, gaskets are commonly known as oxygen-free copper, solid copper gaskets are machined by mechanical cutting, etc., and their excellent softness can fill the uneven parts of the flange surface. Wide application temperature range and low leakage.
We offer a wide range of standard and type solid copper gaskets, as well as different copper products to make gaskets according to customer requirements, such as: copper, brass and so on.
Specifications: 6x10x1, 8x14x1.5, 8x12x1, 10x14x1.5, 16x20x1.5, 20x26x1.5, 16x20x1.5, 24x30x2, 28x32x2...
Copper gasket performance:
Use temperature: about 500 ° C, melting point: 1083 ° C, hardness: ≥ 60HB before quenching, ≤ 45HB after quenching. The copper gasket has good sealing performance and can be processed into various semi-finished products and finished products through cold and thermoplastic processing to ensure metal.
The surface is in close contact with the flange sealing surface. The maximum temperature applicable is 800 degrees. Applicable pressure 2.0Mpa-42mpa.
The purpose of annealing the copper gasket is to soften it.
When it is necessary to bend it to prevent breakage and shrinkage (tube), annealing is required. If it is just sealed, no annealing is required. It can be sealed as long as it is fastened during installation. You can try it out and you can get the result. 
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Plain Particle Board
Plain Particle Board,Plain High-density Particle Board,Plain Chipboard Board,Plain Melamine Particle Board
Luli Group Co.,Ltd. , https://www.plywoods.nl