Attention to the use of electric baskets
PPFD is a key factor in the detection of Plant Growth Light. Optical quantum flux density (PPFD) refers to the luminous flux density in photosynthetically active radiation. Most Plant Growing Lamp on the market that can achieve an average PPFD of 2000 μmol/m²/s have a power of 600W, while Litehome's Plant Light just only need 200W. Can greatly reduce your electricity bills.
With lower production costs, your products will have more advantages. This is why you should choose litehomeLED Plant Grow Light.
Led Grow Light Indoor Plants,Led Grow Light 250w,Led Grow Light Kit,Likesuns Led Grow Light SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com
To grasp the pertinence and feasibility of the plan, we must not discuss it in a general way. According to the characteristics of the project to carry out matching baskets, that can meet the construction requirements, but also to ensure safety, as far as possible so that baskets cover the entire operation surface, leaving no dead ends. According to statistics, some accidents are caused by the unreasonable configuration of the basket. Workers want to work but are not able to reach the limit. They have to take the scaffolding board on the basket to achieve a higher construction height or swing, resulting in accidents. In short, seriously concentrating on a good plan is a guarantee of accurate, efficient, and safe completion of tasks.
2. The equipment that controls the equipment entering and entering the field shall be consistent with the plan, and various accessories shall be complete and effective. We must also strictly examine the material arrival list, carefully count the points and compare them one by one. We can neither mix and match different types of hanging baskets, nor can we use small baskets to be large and shoddy.
3. Strengthen the monitoring of basket installation In general, the baskets enter the construction site in the form of loose parts. It is necessary to focus on monitoring whether each basket is correctly assembled and installed according to the plan. It is necessary to assemble firmly, complete and complete components, and place it in a safe and reliable place.
4. The inspection of installed baskets must be carried out After the installation of the baskets, the basket manufacturers, on-site technical personnel, production personnel and on-machine operators are to be jointly examined and accepted. Focus on the control of the installation position of the basket, the assembly of the structure, the balance of the weight, safety rope, safety lock, and electrical devices, and there should be no obstructions in the up and down operation of the basket. Acceptance must be 100%; when the quantity is large, it can be checked and accepted in stages, and a written procedure can be established. Unauthorized baskets are prohibited from use. The problems existing in the acceptance must be rectified within a certain period of time. After confirming that there are no problems, they should be put into use.
5. To educate and train the pilots, first select the pilots. And related to its education and training, examinations and certification. The focus of education and training is on how to correctly operate and use the hanging basket and how to cope with and deal with emergent situations that may arise, so as to enhance the sense of self-protection of the crew. It must also be emphasized that workers are prohibited from throwing debris down to avoid causing harm to others.
6. To control the day-to-day management, all baskets must be numbered and affixed to the basket so that they are clear and eye-catching. The personnel on each basket must be registered and the stability of the personnel must be maintained; the floor plan of the basket should be drawn. There are numbered names.
To designate a full-time electrician to inspect the electric system of the basket before work every day, the safety personnel check the weights (must be fixed), safety ropes, and safety locks. There must be a special person to inspect and inspect the operation. If necessary, the place (such as the roof) can be closed, and all other persons except inspection and maintenance personnel are prohibited. In the case of multi-work cross-operations, special personnel should be set up for care. All components of the basket must not be used for other purposes.
In addition, it is also necessary to check whether the operator correctly wears a safety helmet, and whether the seat belts are properly attached; it is forbidden to drink after work; and class 5 or above must be stopped.
Basket manufacturers must have full-time maintenance personnel on site to timely repair faulty baskets. It is strictly forbidden to use a faulty basket. Baskets that are finished daily should be parked above the first floor safety net.
7. Before disassembling the basket and leaving the basket, the quality of the project must be checked and accepted, and the dismantling begins afterwards.
It is necessary to know in advance the order of dismantling the baskets, the method of transportation, the site of disintegration, the configuration of personnel, and the weather conditions. Demolition personnel must also make the necessary disclosure.
When dismantling the suspension mechanism, the operator is usually in a high position near the edge. Special attention must be paid. It is also necessary to protect the finished construction products. Vertical transportation should use external lifts and other transportation equipment as much as possible. During transport, avoid bumps during overload handling.
Xianxian Haihua Construction Equipment Factory (professional production of aerial work baskets, mobile scaffolding)
Contact: Mr. Niu