Avoid unnecessary waste of secondary renovations for local protection

For many homes that are re-decorated or partially renovated, some building materials need to be removed during the renovation process, and the area around the removal needs to be protected to prevent damage. Some demolition materials that can be reused also need to be protected to avoid unnecessary waste. During the construction process, “protective decoration” was performed and a “safety helmet” was put on the reusable project.


Green fir decoration     Bingyuan Decoration   

Second-hand decoration and partial decoration must be finished product protection. Experts say that protective decoration is more important for the following types of decoration: The first category is when consumers are not satisfied with a well-decorated house and want to make changes to the part. For example, the need to change the bathroom wall tiles, wall color, office windows, etc., this time we need to carry out the protection of the finished part of the removal. The second type is a house that has lived for two or three years. Wooden doors and cabinets are all very good. If you just want to change the wall, change a sanitary ware, etc., it also involves product protection. The third type is when the overall renovation of the old house is completed. There are individual places in the home that need not be dismantled and eliminated, and can still be used again. For example, radiators, air conditioners, and local floor tiles, etc., also need to be partially protected.

How to carry out protective decoration? Experts suggest that valuable items that can be moved, such as home appliances and high-end furniture, should be evacuated from the construction site as far as possible and transferred to a safer place. If only part of the decoration, then the non-decoration part will be covered with a professional protective film for protection. The protective film is provided by a professional decoration company. The thickness varies, and the texture is soft and hard. It is recommended to use soft protection and hard protection in combination. For example, in the partial renovation of the bathroom, it is necessary to surround the living room sofa with a soft cloth, and then cover the protective film; need to protect the composite floor need to be covered with a protective film, and more expensive solid wood flooring after the protective film, should be A layer of harder plasterboard or cement pressure board is laid.

â–  Protection section

Furniture protection

Soft cloth, protective film cover

If you want to re-lay the floor, you must remove all furniture from the construction site. The furniture placed in the construction space is covered with a professional protective film. For high-end furniture, consumers can first use soft cloth, plastic film and Other materials to deal with it, and then cover the professional protective film, to achieve double protection.

Radiator protection

Handled by professionals

Radiator has a long service life, and has a greater chance of reuse. Therefore, the decoration can be dismantled first, and then hang up again after the construction is completed. It should be noted that the disassembly and installation of the radiator must be done by a professional to avoid bumping by the construction tools.

Pipeline protection

Stay away from the line

Pipes that are buried in the walls or under the ground are concealed and difficult to protect. Therefore, according to the original construction drawing, if there is no construction drawing, try to keep away from the expected line when drilling the wall. For example, laying solid wood flooring, playing keel should be taken to avoid bolts, steel nails and other underground pipeline damage; removal or installation of sanitary ware, it should also be careful not to damage the original waterway.

Lighting protection

Do not turn on the lamp after filming

In the second-decoration of the house, many lamps, especially chandeliers, do not need to be eliminated. Most of the high-grade lights are difficult to clean once they are contaminated. At this time, they should also cover the lamps. After the lamp is covered with a protective film, it should be avoided to turn on the lamp for a long time, otherwise a safety accident may occur due to accumulation of heat. In addition, the switch panel on the wall and the electronic communication equipment at the entrance door should also be protected.

Wall, door and window protection

Avoid bumping

Tiles and paints on walls do not need special protection. When they are not removed, they only need to avoid bumping during construction. After the clay is dropped on the wall tiles, it can be easily wiped, and dust on the wall paint can also be removed. Doors and windows need to be covered with protective film, window frames, door covers, etc. at the construction site to avoid damage.

â–  Dismantling reminder

Wall brick removal

Avoid damage to the circuit

When dismantling wall tiles, care should be taken not to use tools such as large impact drills or sledgehammers. Before dismantling, be sure to find out the original pipeline inside the wall, and whether the wall is a load-bearing wall, etc., in order to avoid destroying the buried burial line when the brick is removed, or damage the wall of the light wall. In addition, the degree of difficulty in demolition of the wall tiles is not the same, and some tiles that are loosely affixed can be removed simply by toggling, while some of the tiles are very firm. A small flat drill is recommended.

Floor removal

Starting from the corner

The process of dismantling the composite wood floor is relatively simple. Use a flat-bladed screwdriver to split the skirting board, and then pry and remove the corner floor along the edge of the skirting board. This floor may be damaged, but other floors can be completely dismantled. Composite wood floors with a locking structure are to be drawn along the long sides of the floor.

When dismantling a solid wood floor, remove the baseboard and still start from the corner. Use a hammer to pick up the wooden floor. Since the solid wood floor is installed on the wooden keel, there will be some elasticity when it is lifted, and the construction is difficult. However, the cutting machine cannot be used because the cutting machine easily breaks the ground and fixes the expansion bolt of the wooden keel to generate sparks.

Wall removal

Top down

More and more designs involve the dismantling of the wall. Although consumers understand that the bearing wall cannot be dismantled, there is still doubt about the dismantling of non-bearing walls. Experts explained that most of the non-load-bearing walls are made of light bricks, and old houses before the 1980s were basically built with red bricks. When dismantling, it must be dismantled layer by layer, one by one, from top to bottom. Avoid smashing with a sledgehammer to prevent injury to the human body and the staircase floor. When it comes to the wall of a buried line, it is necessary to determine the route of the line to avoid damage to the pipeline that can be reused.

Cabinets and ware removal

First remove the connector

When the cabinet is dismantled, the connection between the cabinet body and the wall body such as a screw, a bayonet, etc. is disassembled, and then the cabinet body can be removed. After the water supply is cut off, the sink, etc. are removed and the countertop is easily taken off. In addition to removing the connectors, sanitary ware should also be used to remove the sealant between the sanitary ware and the wall or floor with a trowel to facilitate the smooth removal of the original sanitary ware.

â–  Tips

Protective decoration has "protection fee"

The protection of the decoration should be planned before construction, and the space and items to be protected should be determined according to the contents to be demolished. Generally, home improvement companies charge a certain amount of money for product protection, and the billing method is based on the number of square meters or the number of items to be protected. Consumers are advised to consult in detail and make a budget before renovating.

Second-hand House Renovation Second-hand House Renovation Notice Concealed Decoration Furniture Window House Renovation House Paint Living Room Wall Color Refinement Budget Decoration Living Room Flooring Cloth Sofa Home Kitchen Cabinet Doors Bathroom Tiles Bathroom Doors Bathroom Tiles Color Bathroom Wall Tiles Whole Bathroom Toilet Design Bathroom Floor Tiles Tile adhesive floor tile ld tile

8 Widespread Basin Faucet

kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets-jm.com