Bang Tai Ya teaches you how to care for solid wood furniture.

Now, in the home decoration, the solid wood home is loved by the majority of consumers, and its daily maintenance is directly related to the long service life of solid wood furniture. Here, Bangtai Yaju introduces some common sense of how to maintain solid wood furniture.



How to maintain solid wood furniture should pay attention to the following points:
1. Waxing In addition to frequent dust removal, the surface of wooden furniture is sometimes waxed for further maintenance to increase the aesthetic appearance.
We recommend regular maintenance of the furniture using special pure wood furniture glazing wax. In addition, do not choose those silicone-containing polishes, because silicone will not only soften the coating, but also block the pores of the wood, making it difficult to repair.
Although waxing often does not harm the coating, we recommend that you only polish one or two times a year. Excessive waxing can also damage the appearance of the coating.
2, dust removal Always remove dust, because dust will rub the surface of solid wood furniture every day.
It is best to use a clean soft cotton cloth, such as an old white T-shirt or baby cotton. Remember not to wipe your furniture with a sponge or tableware.
When dusting, use cotton cloth that has been wrung out after wetting, because the wet cotton cloth can reduce friction and avoid scratching the furniture. It also helps to reduce the adsorption of dust by static electricity, which is good for removing dust from the furniture surface. However, water vapor should be avoided on the surface of the furniture. It is recommended to wipe it again with a dry cotton cloth.
When you dust the furniture, remove your decorations and make sure they are handled with care.
3, cleaning In order to remove the surface of the furniture caused by airborne contaminants, cooking fumes, smudges during operation and traces of glazing, we recommend the use of special furniture cleaners. This solvent can also help remove excess wax.
They were rubbed together and did not cause any other adverse reactions.
Recommended wood furniture maintenance procedures are as follows:
(1) Apply the glazing wax to a clean white soft cloth, preferably a natural fiber such as cotton. Please save the use of glazing wax, because only a small amount of polish can keep the furniture beautiful for a long time.
(2) Wipe the glazing wax onto the furniture in the direction of the wood texture. Use the other side of the soft cloth, if necessary, use another soft cloth to wipe off the excess glazing wax on the furniture surface.
(3) Avoid excessive friction during the waxing process. Excessive friction is actually harmful to the matte layer, which can lead to uneven gloss on the furniture surface.
4, water marks Water marks usually take a while to disappear. If it is still visible after one month, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water mark in the direction of the wood grain. Or use a damp cloth to cover the mark, then carefully press the damp cloth several times with an electric iron, the mark can be faded. 5. Hot marks:
Use a dry, ultra-fine furniture to coat the special steel wool velvet pad at the hot mark directly in the direction of the wood grain; you can also use salad oil or mayonnaise on the hot mark, take a soft cloth and gently follow the wood grain Wipe, then wipe it with a clean, soft cloth. Finally glazing. The cigarette butts or the unfinished matches leave scorch marks on the furniture lacquer. If the lacquer is burning, apply a fine-grained hard cloth to the matchstick or toothpick, gently wipe the traces, and then apply a thin layer of wax. It can be faded.
6, burn marks:
The cigarette butts or the unfinished matches leave scorch marks on the furniture lacquer. If the lacquer is burning, apply a fine-grained hard cloth to the matchstick or toothpick, gently wipe the traces, and then apply a thin layer of wax. It can be faded.
7, scratch:
If the surface of the furniture is scratched and the wood is not touched, it can be applied to the wound surface of the furniture with the same color of crayons or pigments as the furniture, to cover the exposed ground color, and then apply a thin layer of transparent nail polish. , hardware decoration parts:
Simply wipe with a dry cloth and do not use chemical-containing cleaners.
9. Sticky paper:
The paper is completely saturated with salad oil, and after a few minutes, it is gently rubbed in the direction of wood grain with steel wool for furniture. Polish after drying.

Solid wood furniture is not only fashionable but also healthy. It is the first choice for modern urbanites to admire nature and be close to nature. Solid wood furniture is usually expensive, especially pure solid wood furniture. So, how to maintain solid wood furniture, are you clear? Bangtai Yaju hopes that the above information will help you.




Source: GO Jiaju Furniture Network

Modern Ceiling Fan

Modern Ceiling Fan,smart ceiling fan,vintage ceiling fan,false ceiling fan

JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.windfansummer.com