| Home>Bearing knowledge> Bearings in the application process |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Bearings in the application process
Source: Bearing network time: 2017-11-03
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The rolling bearing is a fine basic part; therefore, the demand is correspondingly stable when using it; even if the high-performance bearing is used; if it is not used properly, it can not reach the expected function. Therefore, the following matters should be paid attention to when using the bearing:
1. Adhere to the hygiene of the bearing and its surrounding environment; even if small dust that is invisible to the naked eye enters the bearing; it will also add wear, oscillation and noise of the bearing. Therefore, the sound of the bearing should be very hygienic; The clean room depicted by the special disguise is assembled and disassembled. The loading and unloading operator should install and dismantle things, remove oil and lubricants.
2, the application, the device should be careful and careful; does not allow strong impact; does not allow the hammer to directly hit the bearing; does not allow the pressure to pass through the rolling body.
3, the use of appropriate and precise means of things; try to use special things; try to avoid the use of cloth and short fibers and the like.
4, to avoid the corrosion of the bearing; directly take the bearing by hand; to wash away the sweat on the hand; and apply high-quality mineral oil before operation; especially in the dry season and summer to pay attention to rust.
Recommend to friends comments close window
| Bearing related knowledge |
Selection and analysis of bearing equipment methods Classification of "rolling bearings" Details of the four-row cylindrical roller bearing device in imported rolling mill bearings
NTN bearing various failure causes and matters needing attention bearing common sense: "rolling bearing data" detailed
|
This article links to http://
Please indicate China Bearing Network http://
Previous:The application protection of automotive bearings clarifies the following: Selection and application conditions of oscillating machine bearings
DIN Metric Hydraulic Adapter seraspecifications are controlled by Germany, but other countries use them as a reference for their connector and port designs. All metric fittings are measured in millimeters. Unless otherwise specified, the size refers to the outside diameter.
Inculde: Metric Thread O-ring Face Seal Adapter Fitting
Metric Thread Bite Type Hydraulic Adapter
Metric Thread 74° Cone Hydraulic Adapter Fitting
JIS Metric Thread 60° Cone hydraulic fitting adapter
Metric Hydraulic Adapter
Metric Hydraulic Adapters,Metric Fittings And Adapters,Hydraulic Adapter Fittings,Adapter Fittings
SHIJIAZHUANG TOPA TRADING CO., LTD. , https://www.topahydraulic.com