Buy the whole cabinet the most expensive number of cabinets, and some consumers pay attention to the appearance when buying a cabinet, but they ignore the "memory", which is the cabinet plate of the kitchen cabinet, and its quality often affects the quality of the cabinet. Affects future use. Usually the box board is made of two materials, particle board and medium density board. Most consumers are not aware of the difference between the two materials and the good ring. According to the degree of excellent performance, they should be imported particleboard, particle board and medium density board produced by domestic manufacturers with imported equipment, and the second housing board should be domestic. Small factory production of particleboard.

Particleboard: excellent overall performance <br> Particleboard middle layer of wood long fibers, fine wood fibers on both sides, pressed into a board. As the particle board's bending performance is better than the MDF is the main material of the current box. Recently, almost all European and American cabinet factories use particleboard. Imported particleboard meets the highest European E1 environmental standards. The formaldehyde content is very low, the molecular structure is tight, and the bending strength is high. More than 50% of the cabinets use green moisture-proof agents. Plates, such particleboard without any change in the general wet conditions, the overall performance can be said to be better than the density plate.
At present, several large domestic manufacturers can produce products with a compact molecular structure and high flexural strength due to the use of a full set of imported equipment (with an investment of over 200 million yuan). Since the plate is mainly composed of larger wood fibers (compared to density plates), even if it is immersed in water, its expansion rate is only 8% to 10% and it does not expand as much as the density plate. In general, if the surface decoration surface is imported from Germany, most of them are produced by large factories and used for high-end furniture, so there are fewer problems.

Building materials purchase experience to discuss cupboard purchase furniture decoration formaldehyde

Reaction Frame

The function of the reaction frame is to transmit force. Go to the floor and use it to test samples with hydraulic actuators. The size of the reaction frame or part of this frame will be used for most major experiments in the laboratory. Because the geometry of future experiments is unknown, the reaction frame has been designed as a reconfigurable frame that can apply forces at different height levels or vertically from above.

Reaction Frame,Reaction Frame Structure,Shield Auxiliary Reaction Frame,Subway Reaction Frame

Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com