Explosion-proof industrial air conditioner correct installation method and matters needing attention
The general use of civil air conditioners and explosion-proof industrial air conditioners can save energy, improve the correct installation method and precautions for explosion-proof industrial air conditioners, reduce the failure rate, and at the same time prevent some of the damage. The following are the correct installation methods and precautions for explosion-proof industrial air conditioners. Usage Guide - Precise installation and use of air conditioners!
1. The air-conditioning power supply should have a common line and a circuit breaker or air switch should be provided in the public line. Power supply wires and fuses should be properly regulated and cannot be easily changed.
2. In order to prevent insulation damage from forming leakage damage, if there is a premise, a leakage shelter can be set up, the action current is 15-30 mA, and the blocking time should not be more than 0.1 second.
3, the air conditioner's boot, shutdown must use the switch, do not use the direct plug power plug to open, stop the air conditioner. As a result, the formation of an air conditioning system will be disrupted, and secondly, an electric arc will be drawn between the plug and the socket when it is being plugged and unplugged. And durability is in standby. Not only does it consume a certain amount of electricity, but it is also easily struck by lightning during thunderstorms.
4, all electrical plugs must be plugged tight, can not be loose. Otherwise, it will cause bad snoring and damage the air conditioner.
5. If the capacity of the residence's electricity meter is insufficient, it is necessary to increase the capacity first, and do not hold lucky to prevent the fire from being overburdened by the line.
6, the use of the statement should be strictly speaking, according to the provisions of manipulation, do not press the remote control indiscriminately.
7. After the old air conditioner stops, it will not restart within 3 minutes, otherwise it will burn out the compactor easily. The new air conditioner has a circuit to stop the restart within 3 minutes. Even if it is restarting within 3 minutes, the compressor will not work.
8. Once there is a very loud sound, you should immediately shut down and shut off the power, and ask the manufacturer's special maintenance point or office technical staff to participate in the inspection.
9, when the explosion-proof air conditioner is in operation, do not spray insecticide or volatile liquid on it to prevent leakage of electricity into a fire alarm.
10. When the power supply voltage exceeds the rated voltage of 240V or more, it is best to deactivate the air conditioner to be safe. When using an air conditioner, if the power supply voltage is found to be too low, it should be turned off and stopped. Otherwise, it is easy to destroy the compressor.
11. The connection pipe should not be long: The explosion-proof air-conditioner outdoor unit is placed in a heat-dissipating area. The indoor and outdoor machines can receive the full length without lifting the length, and the forced cooling/heating result can be strengthened.
12. Effective use of explosion-proof air-conditioning timing function: When you go and go out, please operate the timer so that it is only running within the time required to save electricity.
Thermostatic Bar Valve
Thermostatic Bar Valve,Hand Shower Thermostatic,Thermostatic Shower System
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucet.com