Heating furnace installation knowledge
Heating furnace installation knowledge One of the best ways to warm in winter is that indoor heating furnace radiators are also called heating radiators. If the winter heating radiator is not properly installed, it will leak water and will cause heavy losses. Therefore, the installation of winter radiators is also very important. From the aesthetics of the installation, to ensure the safety aspects of the advancement, the installation of the winter radiator should follow the following points: 1. First carry out the on-site measurement design together with the technicians of the radiator dealer. 2. Set a construction agreement with the radiator construction unit. 3. The first phase construction of the radiator unit. 4. Construction of the first phase of the heating device. Welcome to the company's official website http:// Note: The first phase of the heating project is after the wall renovation. Construction is never allowed in other renovation procedures. The branch pipe connected to the radiator and the radiator must be buried in the floor and in the wall. Only the temperature control valve can be seen when connecting with the radiator. During the first phase of construction, the number of radiators, the width of the piece, the indirect distance of the sheet, the way of entering and leaving the water, and the center distance of the joint shall be fixed and sealed. The required size shall be kept accurate, otherwise the later radiator shall be affected. Device.
Komatsu Filter,Komatsu Fuel Filter,Komatsu Excavator Filter,Komatsu Genuine Filter JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.huaxinbrush.com