1. 48 hours after the resin plate construction is completed, the resin plate shall be completely cleaned and dust-collected, and the contaminated place may be diluted with a neutral detergent and then wiped with a rag. (Please contact the manufacturer or us for the dilution amount of thinner.)

2, remove the ground sewage, clean the sewage with a clean rag before the resin sheet is dry.

3. After the resin sheet is dry, wax it with a special wax for waxing. The wax water should be evenly applied. After the first pass, it should be completely dry and then coated a second time.

Regular maintenance

The stain on the resin sheet not only contaminates the wax film on the surface of the resin sheet, but also penetrates into the interior of the resin sheet, causing the resin sheet wax to turn yellow, which affects the neatness of the resin sheet. At this point should be timely removal of old resin plate wax re waxing.

1. Use a dust or vacuum cleaner to clean the surface of the resin sheet.

2. Use warm water to dilute the wax for resin plate wax.

3, with a dedicated cleaning machine with the corresponding model of the cleaning plate, the bottom speed grinding and cleaning.

4. The sewage on the resin sheet is sucked cleanly, and then the resin sheet is cleaned with clean water and the sewage is sucked again.

5. After the resin sheet is dry, apply special wax to the resin sheet with a special wax.

6. It is recommended to apply more than 2-3 times to places with high traffic. Wait until the previous wax is fully dried before playing the second one.

7. After the resin sheet is waxed, it should be fully dried before use. Do not step on the resin sheet before it is air-dried.

8, waxing of resin sheet can be regularly waxed and maintained according to different occasions.