Must be collected: the use and maintenance of the vacuum pump filter
December 17 01:07:43, 2023
[Asia Pump Network News] Imported vacuum pump filter is a vacuum pump in the filter device is an important filter parts, the filter effect is mainly depends on the performance of the filter. The import vacuum pump operation in the main filter there are three forms: 1, air intake filter: can effectively prevent the solid particles and fine ash by the maintenance and use of vacuum pump filter Inhalation vacuum pump. Reduce mechanical wear and improve operational reliability. In the extension of the service life of the pump can also effectively protect the system components. 2, exhaust filter: taking into account the exhaust resistance, dust holding capacity, oil and gas separation performance, the legislature of the three requirements to achieve the best balance. Different internal and external locations to use different materials to achieve different separation purposes. 3, oil filter: for the import of vacuum pump oil filter to extend the use of oil mainstream filter, installed in the oil. Second, the use of imported vacuum pump filter and maintenance methods: 1, release the knob bolt filter housing and the head separated. Be careful not to lose rubber seals and fibrous washers. 2, carefully remove the spring and felt pads, and then remove the paper over the core. 3, with a brush to remove the filter crease in the dust and foreign matter, and then gently tap the hand so that the remaining dust fall, wipe the dust on the inner wall of the shell and fiber mat. 4, according to the order of disassembly will have been cleaned or a new filter cartridge back. (Editor: Li Juan QQ:) Recommended reading: Acting purchasing the top ten brands of vacuum pumps Xiamen 2016 CIFIT
The main uses of carbide burrs:
Finish machining of various metal mold cavities; craft engraving of various metals and non-metals, engraving of craft gifts; cleaning up flash and welds of casting, forging, and welding parts, such as machine foundries, shipyards
Etc.; chamfering and rounding of various mechanical parts and processing of grooves, finishing of the inner hole surface of mechanical parts, etc.
Carbide Burr,Tungsten Carbide Cutting Tool,Double Machine Tool,Grinding Stone