There must be many books in our home, but we must not place them in bookcases without disorganizing them. But in the cupboard, it is inconvenient to look for it. Today, the furniture network Xiaobian will help you solve this problem. The following is an ultra-simple magazine racking practice. This kind of bookshelf can only put one book. Everyone can choose the most frequently read one to read and read and change.

The role of simple newspaper rack

The simple book shelf is a shelf specially designed to increase the collection volume. It is simple and convenient. The simple newspaper rack is usually multi-layered, and the bookshelf planks are very firm, and the length and length are very suitable. Its practical function is also very convincing. The number of books placed on different simple magazine racks is different. There are more books placed on simple bookshelfs in larger spaces, books with smaller space are placed less, and simple bookshelfs are simple books because of their simplicity and light weight. The shelf can be hung on the wall. This kind of shelf will not occupy more space. There is also a convenient shelf that can be assembled and disassembled in any combination.

Simple book rack production steps

1. Preparation of materials and tools Making a simple newspaper rack We need to prepare three boards in advance, two to three cardboards of the same size (preferably a three-ply board), three extra-long screws with a screw, paints and varnishes. . There are also two types of production tools, vertical boring and drilling machines.

2. Cut the shape of the board First, cut the shape of the board, vertical and horizontal lines. 3 vertical planks must be the same size. Shelves can be placed freely. Large or small, large can put two thick classical classics and photo albums. These only need to make some changes in length and width. The trick is to cut a beautiful arc. The horizontal plane plank is also basically straight, but cut into a curved shape at a distance of 40 cm from the end.

3. Cutting and engraving The most complicated step in the production of a simple magazine rack is to accurately saw the notches that match the horizontal and vertical frames. Three notches are cut into each plate, as shown in the figure, with one opening at the center and two openings at 20 cm from both ends. The notch on the vertical plate cuts according to its own needs, because it directly determines the size of the grid space. Adjust the position of the incision according to the size of your book.

4, the installation of paint can now put all the boards are assembled to see if the match is good, and then open, paint and varnish. Of course, if you are on the chest, you can paint it directly. In this way, a perfect simple book shelf was produced.

The above is an introduction to the simple magazine rack installation and installation method . It seems that only the shape of the board needs to be fixed and the amount of glue to be used is well controlled. The rest of the work is basically a simple assembly process. I hope this article is correct. You help.

GE&Whirlpool&LG Part

Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com