The dry, windy spring is a period of frequent fires. Therefore, there are experts in the industry to remind consumers that they are renovating. For safety decoration and guaranteeing a good decoration effect, we must prepare for fire prevention, antivirus, and anti-deformation material in advance. Before and during the start, you should pay attention to these seven aspects.

Lycornic Sofa Datang Fubon Sofa

First pass: Pay attention to fire protection, equipped with fire fighting equipment, and use safety materials

First of all, the spring decoration must pay attention to the fire safety during construction. It is necessary to pay attention to electricity safety, and it must not be unwieldy to connect the wires. There is no protection tube on the power line. Smoking is prohibited at the scene and no open flame can be used. Flammable materials such as paint and thinner should be stored away from the fire source, cool, ventilated, and safe. The construction site should be cleaned every day to remove wood chips, paint scales, residues and other combustibles; ensure safe and smooth indoor exit; if necessary, equipped with fire-fighting equipment.

Followed by the use of fireproof materials in the decoration, in accordance with national standards, must be selected within the decorative ceiling should be non-combustible materials, non-flammable or non-flammable materials should be used on the walls, floors and grassroots in order to minimize the risk of fire Sex.

Ceiling keels, cabinets and other wood materials to do fire prevention.

In addition, all electrical circuits should be put through the casing, junction boxes, switches, lamps, ceiling lamps and heat-generating devices around the application of non-combustible materials for fire protection; do not just look at the appearance of the room lighting, but also carefully check Whether it is safe, should choose a luminaire that meets 3C certification in a reliable market.

The second pass: ensure ventilation, reduce the concentration of paint coating volatiles, beware of explosion

Paints, coatings, and thinners that are used in large amounts in decoration are easy to evaporate. If the indoor ventilation is poor, the volatile gases from the paint will not be easily discharged and they will accumulate in the room. The volatilized gas and air are mixed to form an explosive mixed gas. It is easy to explode when exposed to an open flame. When reaching its explosion limit, little attention is paid. When a light switch is turned on or an electric tool is turned on, the generated spark can bring serious problems. as a result of.

The main components of paints and waterproof materials are mostly resinous organic polymer compounds, which contain a large amount of volatile solvents. When used, it is often necessary to use thinner to adjust viscosity for construction. These thinners are highly volatile and diffuse in the air, making them the culprit in worker poisoning during construction. Therefore, decorators must wear protective equipment when using paint in a closed environment. Painters should not stay overnight at the job site.

The third pass: Do not choose damp wood, carefully store to prevent deformation

When buying wood, you must go to a large wholesaler and not a street shop. Because the wood of the large wholesalers is generally dried in the production area and then transported in containers, the wholesalers directly pick up the goods from the containers and then transport them to the homes of the decoration owners, which reduces the chance of wood dampening. If you are not sure, you may want to use a hygrometer to check the humidity of the wood at the time of purchase. It should be reminded that after the timber is bought back, it should be put in the house for two or three days. After it is adapted to the gas phase, the construction process will be carried out. Before construction, the ground should be kept dry and covered with a moisture barrier. In this way, the wood will basically no longer have the problem of deformation.

The fourth pass: Buy tiles also see the moisture content to prevent cracks

There are many kinds of ceramic tiles, and the moisture content should be paid attention to in the spring. The surface is smooth and delicate, and the shiny surface is shiny and shiny, and the soft surface without a smooth surface is a product with a relatively good moisture content. At the same time pay special attention to the difference between pottery and porcelain, the water absorption rate is small, the structure is fine, the percussion sound is clear and mellow is the porcelain brick, and the water absorption rate is high, the structure has many holes, and the percussion sound is the ceramic brick. . Porcelain tiles with low water absorption are not prone to cracks when the temperature difference between day and night changes in the spring.

The fifth pass: Laying a good expansion joints on the floor

When installing wood floors, the installer must be sure to leave enough expansion joints so that when the summer comes, the floor will not warp.

At the same time pay attention to keep the room air dry. In hot springs, the paint dries slowly after brushing. After the paint absorbs the moisture in the air, it will produce a layer of matte. Therefore, the drying agent is generally used to make the paint dry quickly. Similarly, latex paint is not easy to dry, it will not become moldy, it will need to open the air conditioner after construction to dehumidify, completely remove the moisture in the air.

The sixth pass: to prevent cracking of the coating, first deal with the insulation layer, perfect the base layer and then brush

At present, in many new houses, there is a new insulation wall with inner insulation. This type of interior thermal insulation wall in the decoration, it is prone to latex paint cracking problems. In fact, this cracking is caused by cracks in the wall's cement, or the cracking of the wall's "insulation board" joints, not the quality of the decoration. However, in order to pursue a better decorative effect, the decoration company's technical staff came up with many ways to deal with insulation wall cracks, you can choose according to their own actual situation and decoration budget:

One is to apply a layer of cloth to the surface of the wall after it has been cleaned, and use the tension of the fiber to ensure the integrity of the latex paint film. The other uses a decorative material with elasticity to do the substrate treatment for the wall surface. For example, some special putty can make up for the wall crack problem to some extent. Good quality latex paint can also play a role in covering the surface of small cracks. In addition, some consumers simply remove the wall insulation. Although this method can be used once and for all, it will reduce the insulation and thermal insulation properties of the wall, so it is not recommended.

The seventh pass: Four seasons are distinct, minor troubles appear, and preparation for warranty

After the influence of external factors such as the moisture content in the air and changes in the temperature of hot and cold air throughout the year, minor problems such as paint peeling and wall cracks appearing in the decoration will gradually appear. Some experts believe that these “small problems” are so distinct in Beijing. It is difficult to avoid places with heating season. Therefore, it is particularly important to choose a formal decoration company that has a good reputation and can provide after-sales warranty service.

Consumers must first listen to the decoration party's plans for waterproofing and dampness, and sign a warranty contract with the decoration party so that you can negotiate with the decoration party about the decoration problems exposed by the seasonal changes.

Sign in to send a decoration package

Three trees paint entrance decoration paint interior decoration latex paint interior decoration budget new house decoration budget floor tile sofa tile plastic floor tile ld tile

3528 SMD LED

SHENZHEN YGHQ Optoelectronics Co.,ltd. , https://www.leds-smd.com