How do you clear the use of US grout need to pay attention to what use US grout

A lot of people will choose to do beautiful stitching on tiled, wood-paneled walls and floors after the renovation, not only because these decorations are better, but also because they prevent mildew in the crevices and bacteria, so that there is a long wall of mushrooms. The phenomenon occurs. What should you pay attention to when using the US sizing agent? How can you remove the dried sizing agent ? Let's take a look.

1. How to clear the dried US grout

How to clear the dried sizing agent? This problem is one of the problems that will inevitably arise when you use the sizing agent decoration process. It is only a matter of the size of the range. If a large range of tile sizing agent is dried, it will be on the surface of the tile. There are protrusions, this time you can use cloth stained with hydrochloric acid or oxalic acid to remove, but to avoid using the tile gap.

If you use acid to remove the United States sizing agent, then it should pay attention to the proportion and cleaning time, otherwise it is easy to damage the tile surface structure, it is best to choose weak acid cleaning agent.

How do you clear the dried US grout? If the tile grout has dried out, it is more difficult to clean, you may need to buy a special cleaning agent to clean, or need to ask a professional cleaning staff to deal with.

It is relatively simple to clean the US sizing agent that has not been dried yet. It can be removed very well. It can be removed with some alcohol, toothpaste or nail polish. When clearing, be careful to avoid cracks.

2. Need to pay attention to what to use US grout

The use of US grout products to be used with special rubber nozzles and high quality glue guns;

The process of using the US sizing agent is to allow the base surface to dry after the tiles have been applied for a whole day;

When using the US grout, the surface of the tile or board must be cleaned, the width of the gap is 2-5mm, and the depth is about 3mm;

Need to be able to construct US grout product at room temperature 25 degrees, and the construction time is 35-55 minutes, because after mixing the US grout product began to gradually harden, it is inoperable;

Can not be used together with other solvents, otherwise there will be no, yellow, cracking and other phenomena;

If it is winter construction, in order to avoid the problem of slower solidification rate, open the air conditioner to increase the room temperature;

The residual grout on the tile surface needs to be removed within 1.5 hours after construction;

Before the US sizing agent is completely cured, it must not be exposed to water and prevent whitening. After the construction, it needs to be maintained for seven days, avoid contact with acid and strong detergents, and be protected against dust.

Editor's Note: The above is the introduction of how to clear the US grout and what to look out for when using the US grout. US Gum, a good decorative effect filling product, is very helpful for modern decoration, but it is also It should be noted that especially after the dryness of the US grout is difficult to clean.

Hydraulic Main Pump

China Hydraulic Main Pump Manufacturer.We are offering the Best Excavator Hydraulic Pump Spare Parts(Genuine Parts) at the reasonable rate.Caterpillar Excavator Main Pump. Hitachi main pump. Hitachi Excavator Main Pump. Komatsu Main Pump Komatsu Excavator Main Pump.Get Excavator Hydraulic Pump with free return and fast delivery. The excavator hydraulic main pump is easy to install and remove,.The supplying range will be hydraulic main pump parts & hydraulic motor parts for Kawasaki, Komatsu, Hitachi, Caterpillar.We have an extensive inventory of replacement hydraulic pump components for excavators Components for hydraulic main pump. China Hydraulic Pump Products ranges are cylinder block, valve plate, piston shoe, set plate, ball guide, shoe plate.

hydraulic main pump

Juheng's Hydraulic Main Pump have been continuously developed to meet the needs of the era such as high efficiency, low noise and compact design.
Juheng offers variety of variable displacement Hydraulic Main Pump that have high performance, reliability and ease of maintenance.
The Juheng with over 30 years of experience in the hydraulics industry. Juheng manufactures and markets a wide variety of hydraulic products for mobile, industrial, marine and other applications. Dedicated to global customer support, Juheng has operations in Japan, England, Korea, India, China and the United States. In addition to total commitment toward global customer support, Juheng places great emphasis on quality. The hydraulic production facilities in Japan and England are ISO 9001 and 14001 certified.

Hydraulic Pump,Large excavator Main Hydraulic Pump,Brand New Hydraulic Main Pump,Excavator Main Pump

Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.jhexcavator.com