UHMWPE Rod for Excellent Wear Resiatance Plastic Gears

April 30 13:08:46, 2024

Model NO.: PR-UHMW-2
Density: 0.96g/cm3
Thickness: 10-300mm
Size: Any Size
Fob Port: Shenzhen
Sample Availability: Yes
Small Order: Accepted
Trademark: PRIOR
Transport Package: by Wooden Pallet or Plastic Pallet
Specification: SGS, RoHS
Origin: China
HS Code: 3920109090
Model NO.: PR-UHMW-2
Density: 0.96g/cm3
Thickness: 10-300mm
Size: Any Size
Fob Port: Shenzhen
Sample Availability: Yes
Small Order: Accepted
Trademark: PRIOR
Transport Package: by Wooden Pallet or Plastic Pallet
Specification: SGS, RoHS
Origin: China
HS Code: 3920109090
UHMWPE rod for excellent wear resiatance plastic gears 

Description
UHMW PE is a kind of engineering plastic with medium price and superior properties. It has almost combines all excellent properties of plastics. It has excellent abrasion resistance, high impact resistance, self-lubricating properties ,outstanding ability against cold ,eco-friendly ,and light weight.

Characteristics
-Excellent wear resistance
-Can work under the temperature -200°C to +80°C
-Impact and noise reduction
-Chemical resistant
-No water absorption
-Anti-adhesive
-Food safe
-Light weight


Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 0.96
Water absorption 24hrs ISO 62 % 0.01
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75-2 ºC 42
Min. service temperature   ºC -269
Max. service temperature-Long Term   ºC 90
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.42
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 2
Flammability Rating(6mm thickness) UL 94 - HB
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 17
Tensile strength at break ISO 527-2 Mpa 40
Elongation at break ISO 527-2 % >50
Modulus of elasticity after tensile test ISO 527-2 MPa 650
Modulus of elasticity after flexural test ISO 178 MPa 800
Hardness - Shore D DIN 53505   61
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375   0.25
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 3.1
Dielectric loss factor at 1 MHz IEC 60250 106Hz 0.0001
Volume resistively IEC 60093 Ohm (Ω) * cm >1014
Surface resisively IEC 60093 Ohm (Ω) >1011
Dielectric strength IEC 60243-1 kV/mm 45
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
       
Statement:      
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. 

  UHMWPE rod for excellent wear resiatance plastic gears 

Description
UHMW PE is a kind of engineering plastic with medium price and superior properties. It has almost combines all excellent properties of plastics. It has excellent abrasion resistance, high impact resistance, self-lubricating properties ,outstanding ability against cold ,eco-friendly ,and light weight.

Characteristics
-Excellent wear resistance
-Can work under the temperature -200°C to +80°C
-Impact and noise reduction
-Chemical resistant
-No water absorption
-Anti-adhesive
-Food safe
-Light weight


Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 0.96
Water absorption 24hrs ISO 62 % 0.01
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75-2 ºC 42
Min. service temperature   ºC -269
Max. service temperature-Long Term   ºC 90
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.42
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 2
Flammability Rating(6mm thickness) UL 94 - HB
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 17
Tensile strength at break ISO 527-2 Mpa 40
Elongation at break ISO 527-2 % >50
Modulus of elasticity after tensile test ISO 527-2 MPa 650
Modulus of elasticity after flexural test ISO 178 MPa 800
Hardness - Shore D DIN 53505   61
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375   0.25
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 3.1
Dielectric loss factor at 1 MHz IEC 60250 106Hz 0.0001
Volume resistively IEC 60093 Ohm (Ω) * cm >1014
Surface resisively IEC 60093 Ohm (Ω) >1011
Dielectric strength IEC 60243-1 kV/mm 45
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
       
Statement:      
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. 

 

Bedroom Bed

Bedroom Bed,Luxury Bed,Visionnair Bed,Elegant Bedding

PFALL , https://www.pfallfurniture.com