"12th Five-Year Plan for Energy Conservation and Emission Reduction" was released

December 05 00:08:05, 2023

Adjusting and optimizing the industrial structure, strengthening pollution control in key areas, and strengthening the capacity building of pollution reduction and emission reduction as the main task Recently, the State Council issued the “12th Five-Year Plan for Energy Conservation and Emission Reduction”, and “Planning” is the first major industry to focus on emission reduction tasks. Industry, urban residents' living pollution, and agricultural pollution sources have set specific targets. The overall goal of the emission reduction proposed by the Plan is: By 2015, the total amount of chemical oxygen demand and sulfur dioxide emissions in the country will be controlled at 23.476 million tons and 20.864 million tons, respectively, which is 8 less than the 55.517 million tons and 22.678 million tons in 2010. %, the newly added reduction capacity was 6.01 million tons and 6.54 million tons respectively; the total amount of ammonia nitrogen and nitrogen oxide emissions in the country was controlled at 2.38 million tons and 20.462 million tons, respectively, which was 10% lower than the 2.444 million tons and 22.736 million tons in 2010. The newly added reduction capacity was 690,000 tons and 7.94 million tons. The "Planning" also requires that the thermal power industry cut sulfur dioxide by 16%, nitrogen oxides by 29%, steel industry sulfur dioxide by 27%, cement, paper, textile printing and dyeing industry by more than 10%; agricultural sources of chemical oxygen demand and ammonia nitrogen respectively The industry's emission reduction tasks are determined by the overall reduction level of 8% and 10%; the urban sewage treatment rate is increased by 8 percentage points, reaching 85% by 2015. The "Planning" proposed three main tasks: adjusting and optimizing the industrial structure, strengthening pollution control in key areas, and strengthening the capacity building of pollution reduction. The “Planning” also identified key projects for major pollutant emission reduction in five aspects, including upgrading nitrogen and phosphorus removal capacity; continuing to increase water pollution deep treatment and technological transformation; promoting desulfurization and denitrification project construction; and carrying out agricultural source pollution prevention; Control motor vehicle pollutant emissions. The "Twelfth Five-Year Plan for Energy Conservation and Emission Reduction" promulgated by the State Council has proposed three major tasks to make specific arrangements and requirements for pollution reduction work in China.

The first is to adjust and optimize the industrial structure. Improve the energy-saving and environmental protection thresholds for new projects; strictly control the export of high-energy, high-emission and resource products; use the total energy consumption and total pollutant emissions as an important basis for evaluation and environmental impact assessment, for electricity, steel The papermaking, printing and dyeing industry implements the control of the total discharge of major pollutants, and implements equal or reduced replacement of sewage discharges for new or expanded projects; strictly implements industrial restructuring requirements, and focuses on eliminating 20 million kilowatts of Syrian electricity and 48 million tons of ironmaking capacity. The steelmaking capacity is 48 million tons, the cement production capacity is 370 million tons, the coke production capacity is 42 million tons, and the papermaking capacity is 15 million tons.

The second is to strengthen pollution control in key areas. Further expand the construction of urban domestic sewage treatment facilities, the coverage of pollutant emission reduction in key industries, and improve environmental protection standards and control requirements. Strengthen agricultural source pollution control and motor vehicle pollution emission control. Vigorously promote the treatment of fine particulate pollutants (PM2.5) in the atmosphere.

The third is to strengthen the capacity building of pollution reduction. Construction of county-level pollution source monitoring centers, strengthening supervision of pollution sources, improving the online monitoring network of regional pollution sources, establishing an emission reduction monitoring database and realizing data sharing. Strengthen the statistical monitoring of ammonia nitrogen and nitrogen oxides, and improve the monitoring of agricultural source pollution and motor vehicle pollution monitoring. We will promote the standardization and law enforcement capacity building of emission reduction regulatory agencies, and strengthen the equipment for measuring and collecting evidence for pollutant emission reduction in Shengshi and County.

Coil Slitting Machine

Coil Decoiler& slitting & shearing machine

SF is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.

201410115215082120141011521416972014101152211665

Slitting Machine,Coil Slitting Machine,Steel Coil Slitting Machine,Slitting Machine For Steel Coil

Shandong EN FIN CNC Machinery Co., Ltd , https://www.sdfincncmachine.com