Analysis of problems in China's auto parts industry in 2014
Media Facade Lighting,Led Grid Screen Lighting,Flexible Transparent Mesh Lighting,Building Lighting Shen zhen SH LED Technology Co.,Ltd , https://www.pixellightsolutions.com
First, the phenomenon of parts sliding during the process of starting the car parts
In the starting process of the car, it is necessary to cooperate with the auto parts to achieve the purpose of starting the car. In this process, the operation of the auto parts cannot be handled easily, and the car cannot be arbitrarily driven. In most cases, the auto parts cannot fit. , causing the car to start to slip, if this situation is serious, it will lead to the car can not run normally, in the process of solving the problem, the car parts can be inspected and tested as a whole, to achieve the synchronization between the car parts and the engine, so that The car can be stably launched to avoid accidents and cause casualties. However, if the parts are not suitable due to the serious loss of auto parts, it is recommended to replace the auto parts to ensure the normal operation of the car.
Second, the cooperation of auto parts is difficult, the engine is difficult to start
In the process of starting the car, the auto parts start the engine by their own rotation, which is a one-shot process. The slow response of the car parts causes the car to start difficult and there is a flameout. This kind of fault is a common problem of the cooperation of auto parts in auto parts. If the fault is not solved in time, the life of the engine will be lost. The solution is very simple. The corresponding auto parts should be removed, and the gap between the auto parts should be adjusted. The wheel of the car parts is adjusted until the fit between the car parts can be easily rotated. This situation affects the running gear during the driving process. In severe cases, it will directly lead to the flameout, which will seriously damage the engine's power. Therefore, it is recommended that the owner of the car replace the car parts in the case of serious damage to the car parts to ensure the car. The normal driving function.
Third, the car parts are not coherent in the process of starting the car, and the car is not shaking properly.
When the car is started, the car parts are unresponsive, causing the car body to be severely shaken, and accompanied by a harsh sound during the start of the car parts. These phenomena indicate that the pressure distribution of the automobile parts is uneven, resulting in damage to the pressure-bearing device of the automobile, causing the automobile parts to be out of the normal working position, and the operation of the automobile parts is unstable, resulting in serious vibration of the overall body of the automobile. In this case, the car mainly aligns the position of the car parts, disassembles the car parts, and observes whether the internal device is seriously damaged. If not, slightly adjust the force position of the car parts, and adjust the position of the parts to the best condition. This problem can be solved to make the car parts fully fit.
4. The abnormal noise of the auto parts during operation is too large, affecting normal driving.
This is one of the most common problems with auto parts in the process of driving a car. Because the parts of the car need to be often run-in, the internal parts are worn out, or the contact is not tight, or moving away from the original position, these will lead to During the operation of auto parts, the parts collide with each other internally, and different abnormal sounds appear. According to the size of the abnormal sound, the position and condition of the auto parts problem can be judged, which is convenient for the owner to carry out repair and replacement. For this kind of fault problem, the owner should recognize the nature of the problem, take action to repair, observe whether the service life of the auto parts has reached the deadline, or damage the small parts inside the auto parts, or long-term use. The consumption of lubricating oil for automobile parts is severe, resulting in the use of automobile parts that are not smooth, resulting in annoying abnormal noise. Therefore, it is necessary to investigate according to the actual situation. If the parts are damaged, the parts will be replaced. If the parts of the automobile are damaged seriously, the parts will be completely replaced. If the problem of the lubricating oil is added, the lubricating oil can be added. As long as the root cause of the failure of the automobile parts is recognized, the repair can be performed. The medicine is removed from the disease.