Wiring is a key issue in home decoration. At the same time, this is also a very troublesome thing. Therefore, Xiaobian is going to give you all the benefits of the decoration of the small partners, and give everyone a free home decoration circuit transformation. The wiring design scheme will definitely help you.

1, bedroom:

Generally should be 7 routes: including power lines, lighting lines, air conditioning lines, TV feeders, telephone lines, computer lines, alarm lines.

The end of each line of the bedroom wants to stay: the top of the bedside table wants to leave the power line port, and the 5-hole plug-in board with switch is appropriate, can reduce the trouble of the bedside lamp without switching, and should also want to leave the telephone line mouth, if the double head cabinet, You should leave the power supply and telephone line on the top of the two bedside tables. The power supply wiring port should be left above the dressing table. In addition, consider that there should be reflected light above the vanity mirror, and a switch should be installed next to the wire box. A power cord, TV feeder, computer cable, and telephone line interface should be installed above the desk or computer desk. Lighting headlights or ceiling lamps, multi-headlights should be equipped with sub-controllers, the focus is on the switch, it is recommended to use dual-control switch, single, one installed on the outside of the bedroom door, the other switch installed on the bedside side or bedside Easier to operate parts. The air conditioning line terminal interface is required to be reserved, and the position should be set by the air conditioning installation professional. The alarm line is at the top position to leave the line. If the bedroom is equipped with far-infrared heating under the floor, the power cord and the switching regulator must use a switch suitable for the matching of the required voltage of 6 square copper wire. The temperature control regulator can not use the ordinary lighting switch, the circuit must be laid separately until the entrance The power supply control part of the household.

2. Corridors and corridors:

Should be 2 routes: including power lines, lighting lines.

The power terminal interface wants to stay 1-2. The lighting should be based on the length and area of ​​the corridor. If it is wide, the ceiling light and wall light can be installed. If it is narrow, only the ceiling light or the light glass roof can be installed, and the switch should be installed inside the outdoor.

3. Kitchen:

Should be 2 routes: including power lines, lighting lines.

The power cord part is especially important, it is best to use 4mm2 line, because with the renovation of kitchen equipment, the current use of such as microwave ovens, range hoods, dishwashers, disinfection cabinets, food processing machines, electric ovens, refrigerators, etc., so According to customer requirements, you should leave the power interface in different parts, and have a little surplus, in order to use the kitchen equipment added in the future. The power interface should be no less than 50cm away from the ground to avoid short circuit caused by moisture. The lighting switch is preferably mounted on the outside of the kitchen door.

4. Restaurant:

Should be 3 routes: including power lines, lighting lines, air conditioning lines.

The power cord should try to leave 2 to 3 power wiring ports. It is best to use a warm light source for lighting, and the switch is selected inside the door. Air conditioners also need to be interfaced according to professional requirements.

5, the bathroom:

It should be 3 lines: power line, lighting line, telephone line.

The power cable should be 4mm2 cable. Consider high-current equipment such as electric water heaters and electric heaters. The power line interface should be installed in a place that is not easily immersed in water, such as on the upper side of the electric water heater or on the upper side of the ceiling. Electric heaters, currently optimistic about the Yuba, can solve lighting, heating, exhausting and other issues, Yuba switch should be placed indoors. The lighting or mirror switch should be placed on the outside of the door. In a relatively dry place, you want to leave a telephone interface, preferably in the left and right sides of the toilet. The telephone interface should be waterproof. It is best to have an exhaust fan switch next to the toilet.

6, the living room:

The living room wiring should generally be 8 routes: including power cable (2.5mm2 copper wire) lighting wire (2.5mm2 copper wire), air conditioning cable (4mm2 copper wire), TV cable (feeder), telephone line (4-core sheathed wire) , computer cable (5 types of double-legged lines), intercom or doorbell line (optional 4-core sheathed wire, spare 2 core), alarm line (refers to smoke, infrared alarm line, use 8-core sheathed wire).

The line terminals in the living room want to stay distributed: in the top of the TV cabinet, you want to leave the power (5-hole panel), TV, computer line terminal. Air-conditioning line terminals should be reserved for the air-conditioning line (16A panel) and lighting line switch according to the location determined by the air-conditioning professional installer. For single or ceiling lamps, single switch can be used; for multi-head chandeliers, a light sub-controller can be installed on the chandelier to adjust the brightness as needed. At the edge of the sofa, you want to leave the telephone line. On the inside of the door, you want to leave the intercom or the doorbell. At the top, you want to leave the alarm line.

If you need to put a refrigerator, a water dispenser, a humidifier, etc. in the living room, you should leave at least five power cords in the living room according to the position you want to leave the power port.

7, study:

It should be 7 lines; including power lines, lighting lines, TV lines, telephone lines, computer lines, air conditioning lines, and alarm lines.

The writing desk or computer desk in the study room should be equipped with power cord, computer cable, telephone line and TV line terminal interface above the countertop. From the security point of view, 1-2 power sockets should be installed under the desk or computer to prepare the computer accessory equipment power supply. use. If the lighting is multi-headlights, the sub-controller should be added, and the switch can be installed inside the study door. Air conditioners want to stay in the mouth, should be retained as required by professional installers. The alarm line should be at the top to leave the wiring.

8, balcony:

Should be 2 lines: including power lines, lighting lines.

The power line terminal wants to leave 1-2 interfaces. Lighting should be placed on a wall that does not affect the drying of clothes or concealed under the baffle. The switch should be installed in the room connected to the balcony door and should not be installed in the balcony.

9, install the TV cable connector problem:

According to the materials provided by a color TV manufacturer, in all the complaints about the poor quality of the color TV viewing by the user, according to the actual inspection by the door, more than 90% of the users are caused by poor reception signals in the user's home. The problem, but more is the cable connector connection problem in the user's home: Some of the inner core and the outer shielded wire are tied up, causing a large area of ​​parallel line interference waves on the screen; some are poor contact of the inner core, resulting in individual The snow flickering on the table; there is also a serious attenuation of the signal due to too many user lines, and a frequency divider or amplifier should be added. Therefore, in the home decoration, we must think of the factors that may affect the viewing, so as not to affect the future viewing effect.

The article is edited by http://cd.gojiaju.com Chengdu Home Network.

Chengdu GO Jiaju article recommended

Detailed analysis of the third phase of home decoration

120,000 to create 93 flat warm American home improvement

90 flat retro two bedroom tide room

66 flat pink blue apartment is also wonderful

130 flat three-bedroom Macaron color home decoration case

Instrument CNC Lathe Machine

Instrument Cnc Lathe Machine,Instrument Cnc Machine,Instrument Cnc Lathe,Bearing Ring Thread Machine

Shaoxing Sunfong Intelligent Equipment Inc. , https://www.zjsxsunfong.com