At present, most people prefer to install a bead. It not only has a decorative effect, but also has a solid effect on the installed floor and strengthens its firmness. Then , how about the wooden floor door bead ? Is it necessary to install a bead? Let's take a look with Xiao Bian below.

1. How to make wood flooring door

How do wooden floor door beading ? This decoration process is mainly used between the floor and the floor or between the floor and the tile, or else it is the gap between the floor and the door to fill the material, while shielding the gap can improve the beauty, The bead on the door of the wooden floor is divided into two situations: between the floor and the floor and between the floor and the tile.

The wooden floor door bead is also known as the flat bead, it is mainly to cover the same level of ground connection defects in the room and the outside of the room, it can also be a 7-character strip, it can deal with the gap and close the mouth In case of unsightly problems, if the connection between the wooden floor and the floor tile has a high or low error, then the mounting method of the high and low buckles should be selected.

What should be done for the concrete wood floor door bead ? It is necessary to drill the bead to make the bead. Before this, it is necessary to make clear the direction of the water and electricity wiring to avoid being damaged, and then the spacing of the drill hole should not be too large to prevent the bead from sticking to the unevenness. The nail is inserted into the drilled hole and the nail of the beading is nailed on the wooden strip.

Is it necessary to install a bead?

a. If it is between the same floor, it is not necessary

If the home room and the living room's wooden floor are the same style, then the wood floor door beading does not need to be done, but pay attention to the order of laying the wood floor, not because you want to save the plate to choose a region of the area to lay, to The area where the same floor is to be laid is seen as a whole, so as to avoid the gap between the door and the floor.

If you do not want to install a bead, it is best to radiate the shop from the position of the door frame to both sides of the door. This will ensure the integrity of the entrance area of ​​the wooden floor. This kind of craft requires a professional with a high degree of professionalism and sufficient experience. Construction is better.

b. If it is between the floor and the tile, it is recommended to install

Even if the height between the floor and the floor tiles is at the same level, the connection between them must be a gap, or the need to install a bead, especially for the more water-consuming areas such as kitchen space Batten, can effectively prevent the floor from swelling and shrinking.

c. If it is between the floor and the wall, it must be installed

The installation of the beading in this area is actually a skirting board. This construction is very necessary to protect the wall from being tidy and has excellent decorative properties.

Editor's summary: The above is about the wooden floor door layering how to do and the installation of layering necessary introduction, for the installation of layering is not necessary, this mainly depends on the specific area and choose what materials to install the situation to decide, I hope Xiaobian share It helps everyone.

Infrared Thermometer

Digital Infrared Thermometer,Non Contact Infrared Thermometer,Non Contact Medical Thermometer,No Contact Infrared Thermometer

Ningbo Autrends Prevention Products Co., Ltd , https://www.autrendsafety.com