Autumn is the most suitable season for decoration. Because the climate is dry, wooden boards are not easy to return to the tide, but the dry weather will also bring a lot of trouble to the decoration. Industry insiders reminded that the autumn decoration should not only "anti-dehydration" but also "anti-fire", wood products reserved for expansion joints, to ensure that it is applicable in any season.

cabinet

Keep the gap between the cabinet and the wall

In rooms with limited space, the walls will be used to make wall cabinets or wall cabinets, and most of them are made to order. Because of the frequent opening and closing, in addition to the wood itself, it is also necessary to pay attention to the hardware of the joint, the skeleton solidity of the closet and the handling of the paint on the door. Imported hardware is relatively expensive and the quality is better, and consumers can equip themselves. Careful observation during the acceptance, nails and the like must be rust-proof treatment, the cabinet door should be operated lightly, no sound and difficult to open. It is recommended to make a custom factory in a professional wardrobe, on-site installation, affordable and beautiful.

Tip: Considering the principle of thermal expansion and contraction, when installing the wardrobe, the joint between the cabinet and the wall must be kept at a gap to keep the air flowing. Once the weather begins to damp, the water can be evaporated in the air to keep the cabinet dry. Otherwise, the wooden cabinet is close to the wall, and the moisture can only be attached to the wall and the wooden cabinet, which makes the life of the furniture shorter and the clothes are easily damaged.

floor

Install after the renovation

Wood floor construction is a highly technical project and should not be operated in parallel with other projects. Taking a one hundred square meter house as an example, it usually takes a week to complete the construction task of the entire room. Among them, the wooden keel installation and the base layer moisture-proof treatment for two days, the board and the floor are installed for two days, the floor level is smoothed for one day, and the floor paint is painted for two days. In the actual paving process, the floor size is larger than the standard labor saving, and the drying time of the floor paint varies depending on the construction method and material variety.

Tip: In order to prevent the wooden floor from being damaged, the installation of the wooden floor is best after all the renovations are completed. The baseboard is installed after the floor is installed. When laying solid wood flooring, the tightness of the solid wood flooring should be reasonably arranged according to the temperature and humidity of the environment. If it is too loose, the solid wood floor will shrink and there will be a large gap; if it is too tight, the solid wood floor will erect when it expands. Do not move a lot of people within 24 hours after the floor is installed, and do not carry heavy objects.

Background wall

Decorative panel anti-"dehydration"

The background wall is made of wood, which not only adds color to the home, but also has a good texture. It is usually possible to choose the floor directly on the wall and the wooden veneer decoration. The wall on the floor is a common decorative technique, and the wooden veneer is more effective. There are many finished veneers on the market. The design of the background wall, the most important thing is to match the overall style of the home, and the width of the living room, the position of the sofa and the lighting, etc., it is best to ask the professionals to match, or first look at the actual effect, then do Decide.

Tip: During the autumn decoration process, the high-grade veneer such as eucalyptus should be sealed to lock the moisture contained in it; for the wood wire used as the edge, the treatment method is the same, and special attention should be paid. Because the wood line is solid wood, the moisture content is higher than that of the veneer. If the moisture in the wood line is lost, the wood line will shrink and deform, which seriously affects the appearance of the veneer.

Ceiling

Flame retardant material

Electrical lines such as lighting are usually laid in the ceiling, so use wooden ceilings to avoid fire hazards. The ceiling wood structure must be painted with fireproof coating. It is best to use high quality wood treated with anti-corrosion and moisture treatment. In the future, maintenance work may be required. During construction, the maintenance hole must be reserved in advance, and the appropriate size and size should be selected as the reserved hole. Usually, it is left in the place where the air conditioner and the drain pipe are used, which can reduce the difficulty of future maintenance.

When the wood ceiling is about to be completed, the surface will usually be a sealing work. In this case, a gap of 3 mm to 5 mm or a space between the plates and the plate should be reserved for use as a expansion joint and a paint filling process.

Tip: Dry in autumn, pay attention to the use of fireproof materials in the decoration, indoor ceiling should use flame retardant materials to minimize the risk of fire.

Interior door

Don't hide the hinge

The interior door is part of the overall environment of the home, and its appearance and overall style are also a very important reference factor. Some consumers who are pursuing trends will choose brightly colored interior doors, but long-term living in bright colors will cause visual fatigue and is not good for health.

Tip: There are still some doors in the market that hide the hinges inside the door for the sake of appearance, instead of being exposed to the outside, it looks cleaner. However, this type of interior door is more likely to have functional problems, because the hinge is inside the door leaf, and if the hinge breakage occurs during use, it is difficult to be noticed. When the hinge breaks, when the whole door panel collapses, the consumer can find the manufacturer to repair, not only need to remove the door, but also prolong the repair time, which brings great inconvenience.

â–  Tips

Shrinkage cracking should not be rushed to repair

In the autumn, problems such as shrinkage of wooden floors and cracking of walls are normal phenomena that occur during seasonal transitions. Because the air humidity is high in summer, the air in autumn is relatively dry and the water is easily lost. At this point, cracking is a normal phenomenon. Don't worry, wait until the decoration company fixes it in the spring. After that, the material performance is more stable. In the dry season, it is not easy to have problems.

Suitable for ventilation and window opening

Don't rush to stay after the fall decoration, because the autumn temperature is low, the decorative materials smell less, but the pollution still exists, so it still takes half a month to stay again. During this period, you can properly open the window to ventilate, but it is not advisable to open the window too much. The time is also best chosen in the morning and evening. Because of the noon in the autumn, the air humidity is relatively small and relatively dry, which is likely to cause cracking of wood and wall paint. If you can, you can put a basin of water in each space to adjust the indoor humidity.

Wood anti-cracking

In the autumn, the climate is dry. After the wood is transported into the decoration site, it should be avoided at the vent and the oil should be sealed as soon as possible on the surface. Because the wood is easy to dry at the vent, the moisture in the wood will be lost, causing the surface of the wood to crack and crack.

Decoration guide: Hu Zengguang, manager of the industry's decoration engineering department; Zhang Yuan, current decoration director

Beijing News reporter Li Ling

Steel Pipe

The steel pipe pillar structure is simple, the construction is convenient, the cost is reduced, and the work cycle is shortened. The lower steel pipe and the upper steel pipe are provided. The lower steel pipe is provided with a support base plate at a certain depth from the upper end. The diameter of the upper steel pipe is smaller than the diameter of the lower steel pipe.

Steel Pipe,Steel Pipe For Subway,Carbon Steel Pipe,Construction Steel Pipe

Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com