How to prevent "waterdrops" on the surface of paint

The home is in the renovation phase, but the surface of the grass paint drops down like a bead of water, and in some places there are sand-like bumps. What is going on? How to prevent it?

Answer: This is a common phenomenon in paint construction: one is the paint flow drop, which is the appearance of “waterdrops”, and the other is the rough surface of the paint film.

The phenomenon of paint dripping, sagging, and uneven film on the surface of the base layer can all be referred to as paint drop. The main reasons are the preparation of paint is too thin, poor adhesion, part of the paint under the action of gravity flow; paint or spray paint is too thick, the film is too heavy to fall; construction environment temperature is too low, the paint film dry slowly; paint contains Excessive heavy pigment, some paint sagging; uneven surface of the surface of the object, uneven film thickness, different drying speeds, parts of the paint film is too thick and easy to fall; objects on the surface of the substrate with oil, water and other dirt and paint does not blend Affects the bond and causes the paint film to sag.

So what measures can be taken to prevent paint from falling? First of all, we must choose a good quality paint and a suitable diluent for the volatilization rate, and control the amount of infiltration. Secondly, the surface of the object should be treated as smooth, smooth, and clean the surface of oil, water and other dirt. The ambient temperature of the re-applied construction shall meet the standard requirements for the type of paint. For example, the varnish shall be applied at 20 to 27 degrees Celsius and brushed within 3 hours. When painting again, it should be carried out according to the procedure: vertical, horizontal, oblique, and then leveling the paint vertically so that the paint film thickness is uniform. When the spray gun is sprayed, the speed of the spray gun and the distance to the object should be controlled evenly. According to the prescribed process procedure, the vertical spray, vertical spray, and lateral spray are used to make the paint film uniform and uniform in thickness.

The surface roughness of the paint film is specifically expressed as the paint is filmed, the surface is uneven, there are sand grains or small bubbles. The main reasons are: too much pigment in the paint or too coarse particles; the paint itself is not clean, mixed with impurities, and used without sieving; the ambient temperature during the deployment of the paint is low, and the bubbles in the paint are not completely dispersed and discharged; The surface is not clean, there are sand and other debris, mixed into the paint film when brushing; the use of the holder (brush, paint bucket, spray gun, etc.) is not clean, there is residual debris into the paint; construction environment cleaning and protection is not enough , Dust, sand and other debris in the brush stick to the brush or fall on the paint film.

To prevent the rough surface of the paint film, we also have several precautions: First, we must select a good quality paint, use a fine screen before use, and reconcile evenly, and then use it without bubbles. Next, we must pay attention to the surface of the object clean, keep it flat, smooth, dry. Then, it is very important to arrange the order of construction of various types of works reasonably and ensure that the construction environment for painting is free from sundries and dust. Finally, care must be taken not to repeat the use of utensils of different types and performances. If necessary, the residue should be removed before use.

PU Bidet Hose

PU Bidet Hose,Frost Free Hose Sprayer,Frost Proof Hose,Outside Water Spigot

kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucet.com