Reasons of motor bearing overheating and its treatment
Black Red Bond Tile,Tile Red,Dark Red Tile,Red Black Floor Tiles Shandong Yahong New Materials Technology Co., Ltd , http://www.okrooftile.com
July 26 15:05:50, 2024
1, bearing damage. Should be replaced. 2, rolling bearing grease too little, too much or iron and other impurities. Bearing grease capacity should not exceed 70% of the total volume of impurities should be replaced. 3, shaft and bearing with too tight or too loose. Should be re-grinding too tight, too loose shaft inserts should be set. 4, Bearings and end caps with too tight or too loose. Too tight when the processing chamber, too loose when set in the end cap steel sleeve. 5, motor cover or bearing cap assembly bad. Install the end cap or bearing cap stop, install flat, tighten the screw. 6, the belt is too tight or poor coupling assembly. Adjust the belt tension and correct the coupling. 7, too little sliding bearing oil, oil or oil ring stuck. Should be refueling, new oil, repair or replacement of oil ring.