SMC cylinder operation mode and structure operation mode

SMC cylinder operation mode and structure operation mode, please refer to Mr. Mao for details of SMC cylinder
There are many types of buffers installed in SMC cylinders. The above is just one of them. Of course, measures can also be taken on the pneumatic circuit to achieve the purpose of buffering. The combined combination cylinder generally refers to a gas-liquid damping cylinder, a gas-liquid boosting cylinder, and the like formed by a combination of a cylinder and a hydraulic cylinder. As we all know, the working medium used in cylinders is usually compressed air, which is characterized by fast action, but the speed is not easy to control. When the load changes greatly, it is easy to produce "crawling" or "self-propelled" phenomenon; and the working medium used in the hydraulic cylinder is It is generally considered that the incompressible hydraulic oil is characterized in that it is not as fast as the cylinder, but the speed is easy to control. When the load changes greatly, the measures are taken properly, and generally there is no "crawling" and "self-propelled" phenomenon. The cylinder and the hydraulic cylinder are skillfully combined to make up the short and short, which becomes the gas-liquid damping cylinder commonly used in pneumatic systems. The working principle of the gas-liquid damping cylinder is shown in Figure 42.2-5. Actually, the cylinder is connected in series with the hydraulic cylinder, and the two pistons are fixed on the same piston rod. The hydraulic cylinder does not need to be supplied with oil by the pump. As long as it is filled with oil, the hydraulic inlet check valve, throttle valve and oil filling cup are installed in the inlet and outlet. When the right end of the cylinder is supplied with air, the cylinder overcomes the load to drive the piston of the hydraulic cylinder to move to the left (the left end of the cylinder is exhausted). At this time, the left end of the hydraulic cylinder is drained, the check valve is closed, and the oil can only flow into the right chamber of the hydraulic cylinder through the throttle valve and In the oil cup, if the throttle valve opening is opened at this time, the left cylinder of the hydraulic cylinder is drained smoothly, and the speed of the two pistons is fast. On the contrary, if the throttle valve port is closed, the left cylinder of the hydraulic cylinder is drained. Blocked, the speed of the two pistons will slow down. In this way, by adjusting the size of the throttle opening, the speed of movement of the piston can be controlled. It can be seen that the output force of the gas-liquid damping cylinder should be the difference between the force (thrust or tension) generated by the compressed air in the cylinder and the damping force of the oil in the hydraulic cylinder. SMC cylinder operation mode and structure operation mode, please refer to Mr. Mao for details of SMC cylinder
SMC magnetic sensor switch Shanghai Zhending Automation Equipment Co., Ltd. special sales SMC magnetic sensor switch; D series: 1, form: contact magnetic switch; Specifications: general (universal) type, 2 color indicator. 2. Form: non-contact magnetic switch; specifications: general (universal) type, normally closed type; 2 color indicating type with diagnostic output; 2 color indicating type, strong water resistance 2 color indicating type with timer, strong magnetic field; 2-color indicator type wide range detection type, custom specifications.
SMC cylinder-MY2 series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-MY2 series one, form: high-precision guide rail type; 1, series: MY2H, MY2HT; action mode: double action; cylinder diameter (mm): 16, 25, 40. Second, the form: cam follower rail type; series: MY2C; action mode: double action; cylinder diameter (mm): 16, 25, 40.
SMC cylinder-MY1 series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-MY1 series one, form: standard type; series: MY1B; action mode: double action; cylinder diameter (mm): 10,16,20,25, 32,40,50,63,80,100. Second, the form: sliding bearing; series: MY1M; action mode: double action; cylinder diameter (mm): 16, 20, 25, 32, 40, 50, 63. Third, the form: cam follower rail type; series: MY1C; action mode: double action; cylinder diameter (mm): 16, 20, 25, 32, 40, 50, 63. Fourth, the form: high-precision guide rail type; 1, series: MY1H; action mode: double action; cylinder diameter (mm): 10,16,20,25,32,40. 2, series: MY1HT; action mode: double action; Bore diameter (mm): 50, 63. V. Features: Four types of guide rails have been standardized. It can be selected in a wide range according to the quality of the load and the necessary precision. SMC cylinder operation mode and structure operation mode, SMC cylinder details please Mr. Mao SMC cylinder-MXP series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-MXP series MXPJ series: Action mode: double action; bore diameter (mm): 6. MXP series: action mode: double action; bore diameter (mm): 6, 10, 12, 16. MXP8 series: action mode: double action; bore diameter (mm): 8. Features: The cylinder is built into the linear guide and the small pneumatic slide.
SMC cylinder-MXH series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-MXH series: MXH; action mode: double action; bore diameter (mm): 6, 10, 16, 20; Features: Because the linear guide with endless track is integrated with the workbench, the slide cylinder has excellent Rigidity, straightness and non-rotational accuracy. Compared with the MXU, the allowable torque is increased by about 6 times. It can be piped from 3 directions.
SMC cylinder-MU series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-MU series one, MU series: 1, form: standard type; 2, action mode: single pole double action; 3, cylinder diameter (mm): 25, 32, 40, 50, 63. Second, MU series: 1, form: standard type; 2, action mode: single action (extension / contraction); 3, cylinder diameter (mm): 25, 32, 40, 50, 63. Third, MUW series: 1, form: standard type; 2, action mode: double pole double action; 3, cylinder diameter (mm): 25, 32, 40, 50, 63.
SMC cylinder-MB series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-MB series one, MB series: 1, form: standard type; 2, action mode: single pole double action; 3, cylinder diameter (mm): 32, 40, 50, 63, 80, 100, 125. Second, MBW series: 1, form: standard type; 2, action mode: double pole double action; 3, cylinder diameter (mm): 32, 40, 50, 63, 80, 100, 125. Third, MBK series: 1, form: the pole does not rotate type; 2, the action mode: single pole double action; 3, cylinder diameter (mm): 32, 40, 50, 63, 80, 100. Fourth, MB * Q series: 1, form: low friction type; 2, action mode: single pole double action; 3, cylinder diameter (mm): 32, 40, 50, 63, 80, 100. Five, MBB series 1, form: with end lock type; 2, action mode: single pole double action; 3, cylinder diameter (mm): 32, 40, 50, 63, 80, 100.
SMC cylinder-CQM series Shanghai Zhending Automation Equipment Co., Ltd. special sale
SMC cylinder-CQM series CQM series; Form: Standard type; Action mode: Single rod double action; Bore diameter (mm): 12, 16, 20, 25, 32, 40, 50.

SMC cylinder operation mode and structure operation mode, SMC cylinder