Woodworking acceptance methods and acceptance standards
Decoration Carpentry Knowledge Carpentry Acceptance Decoration Home Improvement TV Decoration Switch Home Improvement Bedroom Door Home Improvement TV Background Wall Home Improvement Wall Kitchen Sliding Door Cupboard Door Kitchen Cabinet Bedroom TV Background Wall Bedroom Door To Bedroom Door
Auto Parts Timing Chain Kits,Auto Engine Parts Timing Chain Kit,Timing Chain Kit,Adjuster Timing Chain Kit Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com
Seven points for woodworking acceptance
1ã€Gap: Wood sealing line, corner line, waistline veneer meet seam less than 0.2mm, line and line clip corner joint not exceed 0.3mm, veneer and panel contact not exceed 0.2mm, sliding door entire surface error Not exceed 0.3mm.
2. Structure: Check if the structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.
3. Corner: Check if the corner is accurate. The normal corners are all 90 degrees, except for special design factors.
4. Mosaic: Check whether the spell is tight and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.
5. Modeling: Check whether arc and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape. It should ensure that the surface of the woodworking project is flat and there is no drum or breakage. Symmetrical carpentry projects should be symmetrical.
6, cabinet door: try the cabinet door switch is normal. When the door is open, it should be light and no noise.
7, nail holes: nails used in the ceiling structure, all need to be painted on the nail eyes put rust paint.
Woodworking Acceptance Tips
1, see the gap: the wood seal line, corner line, waist line veneer meet the seam not exceeding 0.2mm, the line and the line mouth slot joint does not exceed 0.3mm, the decorative panel and the plate meet no more than 0.2mm, sliding door entire The surface error does not exceed 0.3mm.
2, look at the structure: the structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.
3, look at the corner: the corner is accurate. The normal corners are all 90 degrees, except for special design factors.
4, see the parquet: whether the parquet is tight and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.
5, see the arc: arc and roundness is smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape.
6, see the cabinet door: cabinet door switch is normal. When the door is open, it should be light and no noise.
7, see the formation: should ensure that the surface of the woodworking project formation, no drum or break.
8. Look at symmetry: Symmetrical carpentry projects are symmetric.
Woodworking acceptance criteria
1. Whether there is a broken phenomenon in the woodwork project. It should ensure that the surface of the decoration of the woodworking project is flat and there is no drum or breakage.
2. Whether the decoration corner is accurate or not. The normal corners are 90 degrees, with the exception of special decoration design factors.
3. Whether the decoration decoration is strict and accurate. The correct decorative wooden parquet should be seamless or maintain a uniform distance.
4. Whether the arc and roundness of decoration are smooth and sleek. In addition to a single, a number of the same decorative decoration also ensure that the same shape.
5, cabinet door switch is normal. When the door is open, it should be light and no noise.
6, the fixed cabinet wall should generally have no gaps.
7, whether the decorative decoration structure is straight. Regardless of horizontal or vertical orientation, proper woodworking practices should be straightforward.
8. Symmetrical decoration woodwork items are symmetrical.
9, decorative panel nails have no make up. Of course, this is the painter's job, but because of its presence in the woodworking project, it is mentioned here.
10. Whether the corners of the ceiling line of the decorative ceiling decoration are smooth and there are no obvious lines or deformations.
11. Whether the skirt line is installed straight after installation and is accurate on the ground.
12. After the decoration, the ceilings of the toilets and kitchens, such as the aluminum buckle plate and the PVC buckle plate, are flat and have no deformation.
13. After the decoration, the installation position of the door handle lock is correct and normal.
14, after the decoration of the bedroom door and other doors open is normal. When closed, the upper, left and right door joints should be tight, and the lower door gap should be moderate, generally 0.5 cm.
