35CRMO round steel price - 35CRMO round steel offer

35CrMo round steel mechanical properties tensile strength σb (MPa): ≥ 985 (100)
Yield strength σs (MPa): ≥835 (85) 35CRMO bar Elongation δ5 (%): ≥12
Area shrinkage ψ (%): ≥ 45
Impact work Akv (J): ≥ 63
Impact toughness value αkv (J/cm2): ≥78(8)
Hardness: ≤229HB
Sample size: sample blank size is 25mm
● Heat treatment specifications and metallographic organization:
Heat treatment specifications: quenching 850 ° C, oil cooling; tempering 550 ° C, water-cooled, oil-cooled.
● Delivery status: delivered by heat treatment (normalizing, annealing or high temperature tempering) or no heat treatment. The delivery status should be stated in the contract. 35CrMo round steel - this steel has high static strength and impact toughness. With high fatigue limit, the hardenability is higher than that of 40Cr steel. The critical hardenable diameter in oil is 16-78mm. The steel has high creep strength and long-lasting strength at high temperature. The long-term working temperature of steel can reach 500. °C; This steel has good low temperature toughness and can work at -110 °C. This kind of steel belongs to fine-grain steel. It has no tendency to overheat when heat treatment, and has small quenching deformation, but it has the first type of temper brittleness; the machinability of steel is acceptable, the plasticity is moderate during cold deformation, and the weldability is poor. It needs to be preheated to 150. It can be welded after ~400 °C, and stress relief treatment should be carried out after welding. This kind of steel is usually used as a tempering part. It can also be used after high-intermediate frequency surface quenching or quenching and low and medium temperature tempering. It is suitable for important structural parts working under high load, especially shock, vibration, bending and torsional load. Parts such as axles, engine transmissions, large motor shafts, turbine engine spindles, rolling mill herringbone gears, crankshafts, hammers, connecting rods, fasteners, and perforators in the petroleum industry; It is used to manufacture bolts with working temperature below 400 °C, nuts below 510 °C, thick wall seamless high pressure for working in non-corrosive medium in chemical equipment with working temperature of 450-500 °C. catheter. In addition, this steel can also be used to replace large-section gears and high-load transmission shafts, turbine generator rotors, and support shafts with a diameter of less than 500 mm instead of 40CrNi steel. Good low temperature toughness, high durability and creep strength at high temperature, working temperature up to 500 ° C, low temperature to -110 ° C, high strength, impact toughness and high fatigue strength, good hardenability, The quenching deformation is small, the cutting performance is medium, and the weldability is poor. It can be used after general quenching and tempering treatment, and can also be used after high and medium frequency surface quenching or quenching after low and medium temperature tempering. It is used to manufacture various important parts that can withstand impact, bending and high load, such as rolling mill herringbone gear, crankshaft, connecting rod, turbo generator main shaft, engine transmission parts, large motor shaft; working temperature is not higher than 400 °C Bolts for boilers can also be used to replace high-load transmission shafts, generator rotors, large-section gears, etc. Our company mainly operates round steel, alloy steel, die steel and tools produced by major steel mills in the form of spot. steel. It can process and produce material type hot rolled round steel and cold drawn round steel for users. We can supply all kinds of round steels of various specifications, such as hot-rolled round steel, cold drawn round steel and perennial agency. Our company also processes all kinds of cold drawn hot rolled round steel. Can be processed into different sizes according to the materials and specifications required by customers! And can be customized for a variety of materials of various specifications of non-standard round steel!
Place of origin: round steel imported from Fugang, Shougang, Linggang, Great Wall Special Steel, Xining Special Steel, Daye, Baosteel, Benxi Steel, Tonghua Iron and Steel, Pangang Group, Taiyuan Forging, Germany and Japan.
Product Name: (special steel) combined steel, die steel, bearing steel, gear steel, high speed steel, carbon steel, carbon steel, joint steel, carbon steel, easy cutting steel, stainless steel, alloy steel round Steel, square steel, billet, steel ingots, forgings, etc.
Material:
Q195, A3, Q235, 10#, 20#, 35#, 45#, 60#, 80#, 20Mn, 45Mn, 50Mn, 65Mn, S50C, K40, T8, T10, Q345A, Q345B, Q345C, Q345D, Q345E, 16MnCR4, 20Cr, 35Cr, 40Cr, 27SiMn, 15CrMo, 20CrMo, 35CrMo, 42CrMo, 45CrMo, 42CrMo4, 42CrMoA, 20CrMnMo, 20CrNiMo, 8Cr3, 10CrMo910, 20CrMoTi, 30CrMnTi, 12Cr1MoV, 18Cr2Ni4W, 18Cr2Ni4WA, 20CrMnSi, 20CrNi, 20CrNi3, 40CrNi, 50CrNi, 30CrNiMo8,30CrMnSi, 34CrNiMo6,36CrNiMo4,38CrMoAL, 40CrNiMoVA, 45CrNiMoVA, 45CrNiMoV, 40Cr2Ni2Mo2,36CrNiMo4,38CrMoAl, Cr4W2MOV 7CrSiMnMoV 12CrMoV, 65Mn2,9Cr18MoV, 5CrNiMo, 9Cr2Mo, 3Cr2W8V, 4Cr9Si2,25Cr2MoV, 25Cr2Ni4MnMoA, 5CrNiMo, 5CrMnMo, Cr12MoV, H13, 3Cr2W8V, W18Cr4V, W6Mo5Cr4V2, W9Mo3Cr4V, 20Mn2, 40Mn2, 50Mn2, 12CrNi2, 9Cr2, Cr12, 1Cr13, 2Cr13, 3Cr13, Y3Gr13, 3Gr13Mo, 6Gr13Mo, 1Gr11MoV, 1Gr5Mo, 1Gr17 (430, 430H, 430M, 430HT), 1Gr17Mo (434), 9Gr18, 9Gr18Mo, 9Gr18Mov, 2Gr13Ni2, 1-2Gr17Ni2, 4Gr9Si2, 4Gr10Si2Mo, Y15, Y35, YF20-40MnV , GCr15, T13, 9Cr2Mo, 40-50CrV, 60Si2Mn, 50Mn, 20CrMnTi, 20CrMnTiH, W6Mo5Cr4V2, W9Mo3Cr4V, W18Cr4V, 9SiCr, CrWMn, 6CrW2Si, 5CrW2Si, 304/2B, 304/BA, 321/2B, 430/2B, 409L , 316L/2B, 304/NO.0, 321/NO.0, 316L/NO.0, 309S, 310S, and the like.
Our company's sales network covers more than 20 provinces and cities. And with excellent quality, it is exported to the Middle East, Southeast Asia, Africa, North and South America. With excellent service and high quality products, we have won the trust of our customers. Our company will rely on good reputation, strong strength, high quality products, low price, to serve the majority of users, and is willing to work together with the new and old customers to create Albert.
Our aim: "Survive by quality, develop by credit".

Our business philosophy: "Sincerity-oriented, customer first".

Our advantage: "The supply is sufficient and the price is reasonable.


Contact: Xu Hui

Sales - Department: 15202231718 022-58659538

Sales two: 15022338258 022-58659521

For more inquiries, please visit http://
Http://
Http://
Http://
Http://