Zhengzhou bottle sampler price, powder sampler manufacturers
Zhengzhou bottle sampler price, powder sampler manufacturers
The bottled sampler complies with GB/T 6679-2003 "Sampling General Principles for Solid Chemical Products" and is suitable for sampling solid chemicals such as powder, small particles and small crystals. The sampling probe consists of two tightly fitting tubes, the outer tube is opened with a set of slots, and the inner tube is correspondingly opened with a set of slots. When sampling, the inner and outer tube notches are closed and inserted into the material at a certain angle. After reaching the specified depth, the groove is opened and opened. The front notch should be closed, and the taken material is poured from the end into the sample container bottle to complete a sampling. Not only suitable for collecting all samples, but also suitable for collecting sample parts. Â
Material: steel, copper, alloy, etc.
Diameter : 19mm , 25mm , 32mm , 48mm
Length : 500mm , 800mm , 1000mm , 1200mm
Number of slots : less than 5 Â Customer optional
Bottled sampler features :
1 . Material 304 stainless steel, no pollution to samples, widely used in pharmaceuticals, food and other industries.
2 . The inner and outer walls of the sampling probe are polished to prevent contamination of the sample and make it easier to clean.
3 . All parts of the sampling probe can be disassembled for easy cleaning and prevent the retention of bacteria and contaminants.
Product selection : Horizontal sampling of loose solid samples can be selected: end-closed sampling probes, open-ended sampling probes, and window-closed sampling probes. If you sample vertically, you can insert the sampler diagonally into the material.
 Samples for viscous solid samples can be selected: universal sampling probes. The unique design of the universal sampling probe is applicable regardless of horizontal sampling or vertical sampling. Â
How to use the bottle sampler :
1. Check that the sampling probe is clean before use.
2. Close the sampling probe slot and insert the material at a certain angle. After reaching the specified depth, turn the slot and turn it 2-3 times. After the material enters the slot, close the slot, carefully withdraw the sampling probe, and sample the probe. The material in the sample is poured from the back end of the sampler into the sample container bottle.
3. If the material is not loose, insert the discharge pusher from the rear end of the sampler to allow the material to enter the sample container smoothly.
4. Wipe the sampled probe and complete the sampling.
phone
fax
Website: http://
Mobile phone
mailbox:
For details, please visit the following website of Zhonggu Machinery Equipment Co., Ltd.:
Http://
For details, please visit the following website of Zhonggu Machinery Equipment Co., Ltd.:
 Http://Product_195.html ">A bottled sampler
For details, please visit the following website of Zhonggu Machinery Equipment Co., Ltd.:
[URL= http:// ] http:// [/URL]