Chinese classical furniture is connected by hoes instead of nails. At the same time, the materials of classical furniture are different from those of modern furniture, so the wood will expand and contract with changes in temperature and climate. Regular maintenance is indispensable. Here are some common methods:

Avoid long-term exposure to sunlight, which will easily make the internal moisture of the wood out of balance and cause cracks.

The temperature difference should not be too large, avoiding the air conditioner opening and closing, causing the temperature to change drastically.

Avoid placing overheated items directly on the table, which can damage the protective paint and wax on the surface.

Use a soft cotton cloth or a soft brush to avoid using metal brushes, hard brushes or rough cloth.

Avoid bumps and hard objects, especially children at home.

For cork furniture, use wax and walnut oil at least once a month to keep the surface smooth and moderately bright. Wax should not be too dense, otherwise it will block the pores of the wood.

For hardwood furniture, keep the air at a certain humidity and adjust to the proper temperature. At least once a month, wax and walnut oil can make the furniture surface smooth and have a moderate luster.

For gold-painted furniture, maintaining the temperature in the air and adjusting it to the proper temperature is critical to the cracking and flaking of the gold.

If the room temperature is too high, the easiest and convenient way is to put a basin of water on the top, bottom and inside of the furniture. This keeps the air temperature.

Maintain good humidity, ideal humidity is about 40%, if you use cold air for a long time, you can put water on the side. Using a humidifier to control the internal temperature within a certain range is the safest method.

Traditional hardwood furniture generally has no lacquer on the surface, just hot wax. There is water in the hardwood, and the hardwood furniture will shrink when the air humidity is too low, and will expand when it is too high. Generally, hardwood furniture has a shrinking layer when it is produced, but it should be taken careless when placed. Do not place it in a place that is too humid or too dry, such as near high temperature and high heat such as stove heating, or too humid in the basement to avoid mold. And dry cracking.

If the house is in a low-rise house, the floor should be properly padded if the floor is wet, otherwise the leg will be easily corroded by moisture.

When handling or moving furniture, it should be handled lightly, and hard to pull hard, so as not to damage the structure. Tables and chairs can not be raised, easy to fall off, should be lifted from the table and the chair, the cabinet is best to remove the door and then lift, can reduce the weight, but also avoid the door activity. If you need to move a particularly heavy piece of furniture, use a soft rope to pull it under the furniture chassis and lift it.

The furniture surface avoids placing too heavy items for a long time, especially TVs, fish tanks, etc., which will deform the furniture. Non-breathable materials such as plastic sheets should not be placed on the table.

If the floor is not flat, the length of time will cause the furniture to be deformed. The way to avoid it is to use a small piece of wood to level it.

Never use hard rags or rough rags to rub hardwood furniture, especially old furniture. Use a clean, soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub back and forth along the wood grain.

The surface of the furniture should be protected from rubbing with hard objects to avoid damage to the paint surface and the surface texture of the wood. For example, when placing decorative items such as porcelain bronzes, be careful. It is best to use a soft cloth. Avoid placing furniture in front of large glass windows facing south. Long-term direct sunlight can make furniture too dry and fade.

Hot water cups, etc., cannot be placed directly on the surface of the furniture, leaving traces that are not easily removed. Color liquids, such as ink, should never be scattered on the table.

Electronic Lighter

The utility model provides an electronic igniter, which is characterized in that it is composed of a shell with an ignition port at the left end and a button port on it, an ignition tube connected with the ignition port at the left end of the shell, an ignition device fixedly connected with the button port, and a cable connected with the ignition device. The ignition device is composed of a rectangular shell and a button sliding connected with the upper end of the shell, The utility model is composed of a striker connected with the lower surface of the button, a power generation ceramic block fixedly connected with the bottom of the shell, a thimble connected with the upper surface of the power generation ceramic block, and a spring which is connected with the power generation ceramic block and sheathed outside the thimble. The electronic igniter has the characteristics of simple structure, safe and reliable, convenient operation, no need to use batteries, etc., which is not only economical and environmental protection, but also convenient for wide promotion.

Jet Flame Camping BBQ Outdoor Lighter,Outdoor Gas Lighter Torch,Refillable BBQ Gas Lighter

Shangqiu Zhengtu Hardware Technology Co,.Ltd , https://www.zlztlighter.com