Wood, board

Plastic composite steel plate:

It is a soft or semi-rigid polyvinyl chloride plastic film covered with 0.2?0.4mm on the steel plate or profiled steel plate, divided into two kinds of single-sided and double-sided coating. It has the characteristics of insulation, wear resistance, corrosion resistance, oil resistance, etc. It can be used for wall panels and roof panels.

Decorative panels

Is it sliced ​​or cut to 0.2?1 thick with natural wood? The thin sheets are made by affixing them to plywood, fiberboard, chipboard, and other substrates after being put together. This material has a clear texture and natural color and is a higher-grade decorative material.

Calcium plastic board

It is based on high-pressure polyethylene as a base material, adding a lot of light calcium carbonate and a small amount of additives, after plasticizing, hot pressing, foaming and other processes. This plate is lightweight, soundproof, heat-insulating and moisture-proof. Mainly used for ceiling surface materials.

Medium density fiberboard

Density fiberboard is a kind of man-made board. It uses plant fibers as raw materials, and is cut into pieces, separated into fibers, formed into slabs (mixed with resin glue and additive paving), under heat and pressure, cellulose and hemicellulose and A sheet of lignin plasticized.

Fibreboard

According to the bulk density, it can be divided into hard fiberboard, semi-hard fiberboard and soft fiberboard. Hard fiberboard is mainly used for the panel of the ceiling and partition wall. The board surface is drilled to form various patterns. The surface is sprayed with various paints, and the decorative effect is better. Hard fiberboard sound absorption, waterproof performance, durable, easy construction.

Yellow Pineapple Wood

The wood is glossy, the annual rings are clear and uniform, the material is soft, easy to dry, and processed. The material color and pattern are very beautiful. It has good paint and cementation properties, is not easy to crack, and has good corrosion resistance. It is a material for high-grade furniture.

Tochigi

Aroma, anti-corrosion, pest control, slightly lighter material, not easily deformed, easy processing, smooth cut surface, beautiful color after painting.

Tochigi

Hard texture, large specific gravity, high strength, and dense structure. It is resistant to moisture, abrasion, and is not easy to be cemented. It has good coloring properties, rough texture, and relatively thick tracheids. It has obvious wooden rays and is not easy to dry. Generally, it can be made of wood flooring or furniture.

Ash

Material is slightly hard, beautiful pattern, corrosion resistance, water resistance, easy processing, high toughness, cemented paint, good coloring performance, good decorative performance, is a kind of wood used in the current decorative materials.

Melamine board

The full name is melamine impregnated film coated wood-based panels. The paper is made of melamine resin adhesive soaked in paper with different colors or textures, and then dried to a certain degree of curing, and it is paved on the surface of particleboard, medium-density fiberboard or hardboard, and the hot-pressed decorative board.

PE calcium plastic board

The main raw materials of calcium plastic board are resin, filler and foaming agent. It is a raw material plastic mixing machine to uniformly press out the sheet material in the mold expander to expand the heat to open the mold, the sheet material immediately expanded into calcium plastic foam board. The expansion of the expansion of the long-expansion 1.7 times the thickness of the expansion of 2 times. The foamed sheet in the hot mold was immediately vacuum hot formed. The specifications are generally 500mm x 500mm and the thickness is 6mm.

Aluminum composite panel

It is based on high-pressure polyethylene as the substrate, adding a large amount of aluminum hydroxide and a suitable amount of flame retardant, plasticizing, hot pressing, foaming and other processes. This plate is lightweight, soundproof, heat-insulating and moisture-proof. Mainly used for ceiling and wall surface materials.

Plywood (plywood)

The plywood is a three- or multi-layer plate-like material obtained by peeling a veneer into a veneer or a wood veneer, and then bonding it with an adhesive. Three or more layers of plate-shaped material are generally used, and odd-numbered veneers are generally used, and adjacent veneers are formed. The fiber direction is perpendicular to each other and the front and the inner plates are arranged symmetrically on both sides of the center layer or the core.

Slim wood plywood

The ash, willow, wood, birch, etc. are cut into thin slices of 0.1-0.5mm thickness, and plywood is used as the base material. The pattern is beautiful and the decoration is good.

Liu Anmu

The material is moderate in weight, slightly thick in structure, easy to process, has good cementation performance, and slightly warped and cracked in the drying process. It is mostly used for making plywood or penta-plywood.

Chinese fir

The material is light and light, easy to dry, easy to process, rough cut surface, medium strength, easy to split, good adhesive performance, is currently used mid-range wood.

Tochigi

Glossy wood, slightly thick structure, slow drying speed, not easy to warp, easy to process, strong nails.

Basswood

The material is soft, grease, abrasion resistance, corrosion resistance, not easy to crack, fine grain, easy processing, strong toughness. The scope of application is relatively wide, and it can be used to make decorative materials such as wood lines, blockboards, and wood crafts.

Redwood

Hard material, not easy to process, not easy to dry, strong nail holding power, good cementation and paint performance. Suitable for decorative plates and high-grade furniture.

Bagasse chipboard

Sugarcane bagasse is the residue after sugar refining. The sugarcane bagasse with the same chemical composition as wood is a very good raw material for making plates. Due to the small proportion of bagasse, the fiber quality is good, the prepared plate has high strength and light weight. Low water swelling rate. It is a medium-density chipboard with smooth surface, beautiful color, good dimensional stability, good mechanical processing performance and decorative performance.

Uses: Suitable for furniture, construction, carriages, ships, packing boxes and other production industries.

Gradual structure particle board

From the surface of the chipboard to the center, the shavings gradually changed from small to large, and there was no noticeable change in the core layer. The air-laid paving machine was used. Smooth and smooth surface, high strength, good dimensional stability, good mechanical processing and surface decoration.

Directional Particleboard (OSB)

Oriented structure particle board is a kind of flake with 40mm, 70mm, width 5mm, 20mm, thickness 0.3mm, 0.7mm, and processed by special equipment with small diameter material, thinning material, wood core, board skin, branch material, etc. as raw materials. , sizing and special equipment A core-slab splicing plate is crisscrossed and oriented, and after being heat-pressed to form a man-made board. Because OSB uses a special process and many special equipment, it has the advantages of high bending strength, small linear expansion coefficient, good dimensional stability, strong nail holding force, easy surface decoration, etc. It is widely used in packaging, construction and vehicles. Shipbuilding and other industries.

Ash (White)

Tough and elastic, sapwood pale milky white, heartwood ranging from light brown to dark brown. Wood grain is obvious, coarse grain. Simple processing, easy to bend with steam method. use

Luxury furniture, flooring, moldings, fine woodworking products, sports equipment, tool handles, etc.

Ash wood

Tough and elastic, milky white or pinkish. The processing is simple and it is easy to bend with the steam method, but it is apt to decay, so it is not easy to use for appearance.

Fireproof board

Fire board is made of silicon or calcium material as the main raw material, and a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed by autoclave technology made of decorative plates. It is a new type of material that is being used more and more. Its use is not only due to fire protection. The construction of the fire board requires a relatively high requirement for glue sticking, and the fire board with better quality is also more expensive than the decorative panel. Fire board thickness is generally 0.8mm, 1mm and 1.2mm

Plate furniture brand decoration furniture paint paint mahogany white furniture