FANUC 0I system CF card position description (4)


Third, the servo turret control battery: mainly in the memory servo turret controller parameters, when the battery power is insufficient, only the controller will display the warning "A90" or A9 at the beginning, please check or replace it regularly (Figure 11). This battery uses a special battery for Mitsubishi controller. Generally, the normal voltage of the new product is about 3.6V. When the voltage is lower than 3.2V, it needs to be replaced, because the signal detection is occasionally bad when the voltage is at the critical point.

2

Figure 11 servo turret battery

Battery replacement precautions

(1) The machine should be turned on and replaced.

(2) The battery polarity should be installed correctly.

(3) The battery holder should be confirmed to be oxidized.

(4) Please purchase an alkaline battery when using the No. 1 battery.

(5) FANUC computer battery and servo turret control battery Please use the original battery to ensure safety.

(6) Replace the dedicated battery of the same model.

※Please list the battery in the inspection and maintenance items to avoid the machine crashing due to long-term shutdown.

Previous page

Wireless Thermometer

Smart Wireless Thermostat,Wireless Kitchen Thermometer,Thermometer With Stainless Steel Probe,Electronic Wireless Digital Thermometer

Chengdu Augus Science Technology Co., Ltd. , https://www.vluckyaugus.com