N50 40mm X 25mm X 5mm 40X25X5mm Neodymium Permanent Magnets

June 21 11:07:36, 2024

  • Model NO.: 240815TC-X05
  • Shape: Block
  • Grade: N50
  • Material: Sinered NdFeB Magnet
  • Advantage: Low Weight Loss, High Corrosion Resistance
  • Specification: ISO9001 & TS16949 & ISO14001& SGS & Rosh
  • HS Code: 85051110
  • Application: Industrial Magnet, Motor Magnet, Power Transmission
  • Coating: Nickel
  • Size: Customized
  • Industrial Application: Motor, Generator, Elevator, Automatic Control
  • Trademark: TC
  • Origin: China
N50 magnets are very powerful and hard to seperate them away,
so when you receive the package,
please be carefull to handle them: don't let them to attract with each other in a long distrance,

or they will be cracked suddenly, as magnets are fragile!

 
Features:
Size: L*W*H= 40mm*25mm*5mm
Material:N50 neodymium magnet  (Nd2Fe14B)
Surface: Ni-Cu-Ni plated
Magnetizing direction: axial

Safety Warning about handling neodymium magnets  
1. Handling strong magnets in a proper manner is necessary to prevent personal injury and property damage, which include magnet damage.  
2. These magnets are not toys. Please do not give neodymium magnets to children under 3 years old. Small magnets pose a choking hazard, and can be lethal if swallowed. In addition, large magnets can easily pinch fingers. So always supervise children when playing with magnets and be sure they are aware of the dangers involved.  
3. Please keep magnets away from people who are wearing pacemakers or other medical devices. These magnets could also damage CRT monitors and TV's.  
 4. It is recommended to wear gloves when handling magnets.  
5. Always handle magnets individually. Do not handle multiple magnets at the same time unless they are widely separated or stacked together.  
 6. When placing magnets together, place a spacing material between them such as a piece of plastic, wood or cardboard so that they are easy to separate when needed.  
 7. Maintain a distance of at least 3 feet from other magnets or magnetically susceptible items when handling the magnets. Pay particular attention to scissors, knives, screw drivers or any other sharp metal objects.  
 8. To separate one magnet from the others, place them on a durable non-metal surface with the magnet-to-be-separated hanging off the edge of the table. Use one hand to firmly hold the other magnets on the table, especially those closest to the magnet being separated. Use the other hand to firmly hold the magnet you are separating. Push it down and away from the other magnets, until a magnetic attraction is no longer felt. Keep the separated magnets a safe distance from each other.


neodymium magnets:

ndfeb magnet
sintered ndfeb magnet
rare earth disc magnet
sintered rare earth magnet
permanent ndfeb magnet
linear motor magnet
abs sensor magnet
energy saving motor magnet
powerful magnetic hook
voice coil motor magnet
roof motor magnet for automobile,
wind turbine generator magnet,
oil-field motor magnet
traction motor magnet
micro motor magnet
vibration motor magnet

1.grade:n35-n52, n35m-n50m, n30h-n48h, n30sh-n45sh, n30uh-n40uh, n30eh-n38eh, n30ah-n33ah

2.shape:disc, ring, block, segment, cylinder, trapezoid, customized design (design proper magnets for clients specific requirements)

3.coating:ni, ni-cu-ni, zn, tin, epoxy, ni-ag, ni-au, etc.

4.applications of neodymium magnet(neo magnet, ndfeb magnet):permanent magnetic motor, energy saving motors, permanent magnet generators, permanent magnet traction machine for elevator, linear actuators, linear motor, lifting magnet, ndfeb pot magnet, speaker, sensors, earphones and other musical instruments, magnetic resonance imaging, magnetic chuck, magnetic bearings and couplings and other magnetic applications.

5.size:customized size per your requirements, largest block length of 150mm, biggest ring of d220mm, smallest thickness of 0.5mm

6.directions of magnetization:
a.thickness magnetized
b.axially magnetized
c.diametrally magnetized
d.multi-poles magnetized
e.radial magnetized
f.customzied specific requirements magnetized

7.other info
hs code:85051110
standard:iso9001 & ts16949 & iso14001& sgs
origin:china
packing:carton/pallet
transportation:by express/by sea /by air

8.process flow:
raw material---->strip casting---->milling---->pressing---->sintering---->performance testing---->machining---->coating---->inspection---->magnetizing---->final inspection---->packing---->delivery

9.typical physical properties

parameter unit standard
curie temperature °c 310-380
maximum operating temperature °c 80-230
hardness hv 550-650
electrical resistivity μω.cm 150
density g/cm3 7.40-7.80
bending strength mpa 250
temp coefficient of br %/°c -0.09~-0.13
temp coefficient of hcj %/°c -0.45~-0.70

8pcs T Handle Hex Key Set

8pcs T handle hex key set,hex key set,hex key manufacturer,T handle hex key

henan horn tools co.,ltd. , https://www.nbhorntoolsltd.com