Shaanxi Garment Inspection 40% failed

In the fourth quarter of 2009, Shaanxi Provincial Bureau of Quality and Technical Supervision carried out supervision and spot checks on enterprises that manufacture and distribute clothing products throughout the province. A total of 36 companies were spot-checked and 63 batches of samples were taken. After testing, the pass rate of physical quality was 59%.

The random inspection results showed that the fiber composition and content of 21 batches of products were unqualified, accounting for 22.5 of the unqualified total. The main reason was that the measured data of the test results were inconsistent with the content of the original label components, and there was a phenomenon that the content of the ingredients was high or low. 4 batches of PH value over the range, that is not conducive to human skin health but also easily lead to the occurrence of various skin diseases. The quality of 14 batches of product labels was not standardized, accounting for 15% of the total number of unqualified products. The main reason was that the labeling content and requirements were not implemented according to the current standards and safety technical requirements, and there were many missing elements. The color fastness of individual products failed. The color fastness of 2 batches of products did not meet the requirements set by national standards, accounting for 2% of the total number of unqualified products. Clothing with poor color fastness tends to fall off and fade when it comes in contact with water, sweat, or saliva.

Regarding the major quality problems found during spot checks, the Shaanxi Provincial Bureau of Quality and Technical Supervision has instructed the municipal quality and technical supervision departments to strictly follow the requirements of the relevant laws and regulations of the product quality law, and dealt with enterprises that failed to meet the quality requirements during the spot checks in accordance with the law and supervise the enterprises within the time limit. Reorganization. And will continue to track the quality of clothing products, promote the continuous improvement of the overall quality of the industry, and create a comfortable consumer environment for consumers.

PVC Cladding Material

PVC is a environment-friendly material. It not only can be nailed, drilled and adhibited like wood, but it can also be bent as customer's request. It's Light texture, good toughness, moisture & steam resistance, corrosive resistance, flame retardant, noise resistance, etc. So it widely used in display panel, toilet partition, office partition, etc.PVC board is a board with honeycomb mesh structure in cross section made of PVC as raw material. PVC board accounts for the largest proportion of 60% in the building materials industry, followed by the packaging industry and several other industries with small-scale application.

Pvc Cladding Material,Pvc Cladding,Plastic Cladding,Plastic Shiplap Cladding

Xiamen Dahe PEB Construction Technology Co., Ltd. , https://www.dahecfsbuilding.com