Shower installation four main points

How to install the shower? What are the precautions for the shower installation? Do the male companions know one or two? For the bathroom shower, want to experience the refreshing shower, choose one of the dazzling shower products. A quality shower is the first step, and a more important second step is the installation of the shower. So what is the point of the shower installation? Today, Xiaobian will talk about the installation points and related precautions of the shower, and don’t need to find a decoration master to help you.

First, the shower installation points

1, protect the faucet and other hardware

When tightening the faucet, the careful person will wrap the thicker cloth or plastic film on the screw cap of the faucet to prevent the faucet from being squandered by the wrench.

2, pay attention to the installation and clean up

During the installation process, some dust and dust will inevitably be generated. It should be cleaned after the installation work is completed. Especially the newly renovated pipes have more impurities. If the pipes are not cleaned, the water will be affected. Keep the site clean and rinse it out with water.

3, determine the height of the shower installation

When determining the installation height of the shower, the installer determines the optimum height according to the trial situation of the owner's site, which is convenient for the owner to use in the future.

4. Determine the pitch and height of hot and cold water

In the general market, the hot and cold water center of the shower faucet has a hole spacing of 15 cm, and there are two S joints inside, which can be appropriately adjusted, and the error cannot exceed 1 cm.

Second, the shower installation notes

1. It is necessary to punch holes when installing the shower. When drilling holes, it should be noted that the water pipes in the wall cannot be penetrated;

2. When installing the circular bottom cover on the shower, be sure to tighten the screws, otherwise the shower will fall off;

3. When the hand shower is installed, it cannot be robbed or distorted;

4. Before installing the shower, be sure to determine the height of the installation and mark it.

After reading the information on the shower installation, do you have more information about the shower installation? If you want to know more about the installation of the shower, please pay attention to the Chinese bathroom network, here will provide you with More comprehensive, more detailed, updated information.

Tube Led Grow Light

The T8 36W plant light is a high-quality lighting solution specifically designed for plants. With its 36W power output, it provides ample light for healthy plant growth. The T8 design ensures easy installation and compatibility with most standard fixtures.

This plant light emits a balanced spectrum of light, including both blue and red wavelengths, which are essential for photosynthesis. It promotes strong root development, lush foliage, and vibrant flowering in plants. The T8 36W plant light is suitable for a wide range of indoor plants, including flowers, herbs, and vegetables.

Not only does this plant light enhance plant growth, but it also saves energy with its efficient design. It has a long lifespan, ensuring prolonged use and cost-effectiveness. The T8 36W plant light is the perfect choice for plant enthusiasts and professional horticulturists looking to optimize plant growth indoors.


Tube grow light have the following functions in large-scale agricultural cultivation:

1. Provide light: tube plant lights can provide the light required by plants, especially in winter or areas with unsuitable climatic conditions, which can extend the light time and promote plant growth and development.

2. Control lighting conditions: By adjusting the brightness and spectrum of the lamp plant lamp, you can precisely control the lighting conditions required by the plant, such as different growth stages need different light intensity and spectrum, which can be adjusted according to the needs of the plant to improve the yield and quality.

3. Energy saving: Compared with traditional lighting methods, tube light can use energy more efficiently and reduce energy waste. At the same time, the brightness and spectrum of the lamp can be adjusted to maximize the needs of the plant and avoid the waste of energy.

4. Expand the planting scale: tube plant lights can provide light in any location, not limited by natural lighting conditions, and can be planted underground, indoors or in areas without sunlight, thus expanding the planting scale.

5. Control the growth environment: the lamp can be combined with other equipment (such as temperature control, humidity control, etc.) to form a complete indoor planting environment, which can more accurately control the growth environment of the plant and improve the yield and quality.


Tube Led Grow Light,Led Grow Tubes,Grow Light Tubes,Full Spectrum Led Tube Lights

Shenzhen Pvison Technology Co., Ltd. , https://www.pvisunggrowlight.com