YWP stainless steel submersible pump maintenance and repair
October 18 10:09:23, 2023
YWP stainless steel submersible pumps for the vertical structure of the pump, in the usual good pump maintenance and care work, not only can extend the life of the pump can also be used at any time to ensure that the pump is available. The following is about YWP stainless steel submersible pump maintenance and care methods are described below: YWP stainless steel submersible pump maintenance and care 1. Each use, especially for thicker viscous slurry, the pump should be placed Run in the water for a few minutes to prevent deposits left in the pump to ensure that the pump clean. 2. The pump should be managed and used by staff, and regularly check the pump circuit and pump work is normal. 3. Under normal conditions, the pump should be filled or replaced with oil (10-30 # oil) after 300-500 hours of use to keep the mechanical seal in a good lubrication state and improve the service life of the mechanical seal. 4. The sealing ring between the impeller and the pump body has sealing function. If the sealing ring is damaged, it will directly affect the performance of the pump and should be replaced if necessary. Above is the YWP stainless steel submersible pump maintenance and care methods, in daily life, I hope we can use this knowledge. Expand to read: China Construction Water Exhibition Pump Valve Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // beng.liuti.cn/ (service hotline:)