Bathroom renovation construction considerations

The pace of modern people is getting faster and faster. Many white-collar workers pay more attention to the comfort of the bathroom. A good bathroom can make people feel comfortable. Bathroom decoration is becoming more and more important. Some points:


Baker Ma bathroom cabinet Dongpeng ceramic tile

As an important functional area in the home life, the bathroom will naturally take more thoughts in the decoration. In order to create a comfortable and warm sanitary space, you must know the following points.

First, the threshold

The threshold is a barrier that prevents water from overflowing the bathroom. Its design and construction points are:

1) The upper plane of the sill is to be tilted towards the inside of the bathroom so that the water droplets can slide smoothly into the bathroom;

2) The threshold should be the same as the width of the door frame, and the thickness of the door frame should be the same as the thickness of the wall so that there will be no large access when laying the floor tiles, and the chance of creating a breach will be relatively reduced.

Second, the ground waterproof

There are many kinds of waterproof material, and the most popular one is water repellent. When laying a waterproof layer, it should be spread to about 20 cm above the foot of the wall. It must not be lower than the height of the lintel. When there is a reserved pipe on the floor, the waterproof layer needs to wrap the reserved pipe. After the waterproofing of the floor is done and dried, it must be immediately primed with cement mortar or protective measures to prevent damage to the waterproof layer.

Third, the laying of floor tiles

1) There must be about 1 percent of the discharge slope and the slope is towards the floor drain;

2) The seams of the tiles must be the same in thickness, and must be aligned with the seams of the tiles;

3) When the front wall of the bathtub is tiled with tiles, the tiles are best affixed to the bottom of the wall before they are attached to the wall to avoid breakage.

Fourth, washing face

The surface of the washboard countertop should be selected to be “all-in-one” (ie, the surface material of the countertop is consistent with the internal material composition and color), and a countertop with only one surface of the plastic shell cannot be selected because only the surface of the surface of the plastic shell can be repaired once it is damaged. (To test whether the countertop is "fullbody", you can use the light to illuminate from the back of the room. Light-transmissible is the "full-body" countertop). In addition, joints must be applied to the joints between the tabletop and the washbasin to prevent the water from oozing from the joints.

Fifth, the toilet

Generally, when installing a toilet, it is customary to use cement mortar to fill the toilet to fix the toilet. In fact, this method is wrong. After this method is used to fix the toilet, the toilet cannot be disassembled again. If the pipeline is seriously blocked, only knock it off. Toilet one way.

Sixth, exhaust fan

When people build houses, they usually pay less attention to bathroom ventilation equipment. Most of them only install an exhaust fan. The bad gas in the bathroom cannot be discharged outside and still just circulates in the bathroom. As an important functional area in the home life, the bathroom will naturally take more thoughts in the decoration.


Construction Acceptance Experience Floor Tiles Bathroom Toilet Interior Decoration Home Cement Floor Tile Tile Rubber Floor Tile Decoration Home LD Tile

Square Shower Elbow

Square Shower Elbow,Brass Shower Elbow,Hose Brass Connector,Wall Elbow Shower Socket

Kaiping Rainparty Sanitary Ware Technology Co.,Ltd. , https://www.rpshower.com