Faucet careful selection of five elements
Although the faucets are small in size, their status in the home is very important. Every family needs water for daily use and always has frequent and intimate contact with small faucets. If the water tap is leaking or not used every day, it is very likely that this close contact will become a violent blow. Then, when you first purchase the water dragon, you should pay attention to it and try to buy a faucet with a good quality. Experts remind consumers that when they purchase a faucet, it is best to be able to turn, look, feel, try, and feel. When turning the handle, it feels light to indicate that the valve core is good, and the surface is bright as a mirror, which indicates that the coating is good and can provide manufacturers with test books. The products can guarantee quality, and experience the water flow to perceive the bubbler effect. The brand is guaranteed after-sales service. Turn handle: feel light valve is good Common faucet spools have steel ball spools and ceramic spools. Steel ball valve core has a good resistance to pressure, but the disadvantage is that the rubber ring from the sealing effect is easy to wear and will soon be aging. Compared with the steel ball valve core, the ceramic valve core is more heat-resistant and wear-resistant. At the same time, the ceramic valve itself has a good sealing performance, so it can achieve a high degree of resistance to opening, and will not cause water nozzle drip due to valve core wear. Ceramic faucet, feel more comfortable, smooth, and open and close quickly. Since the valve plug is inside the faucet, the consumer cannot see the valve plug when purchasing, but the consumer can easily judge the quality of the valve plug based on the feel of the rotating handle. In general, if the consumer rotates the handles up, down, left, or right, it feels good if they feel light and free from blockage. Look at appearance: plating should be bright as a mirror After the faucet is polished and cast, the surface shall be plated with nickel or chromium to prevent oxidation of the faucet. After plating nickel or chromium, a medium-sized hydrochloric acid test shall be performed on the faucet. After the test, the plating shall be free of rust during a certain period of time. It is understood that only the faucets that pass the neutral salt spray test can be delivered. When consumers purchase, it is best to place the faucet in a well-lit place. The surface of the faucet should be bright as a mirror, without any oxidation spots, scorch marks, no air holes, no blistering, no leakage plating, and uniform color; The hands are free of burrs and grit. After pressing the tap with a finger, the fingerprints quickly spread out and the dirt is not easily attached. To test the book: quality is more assured In general, consumers can use the method of weight estimation when purchasing. Brass is heavier and harder, and zinc alloy is lighter and softer. However, the experts of Kuda's decorative main material department believed that the quality of faucets should not be judged by their weight alone, “because some manufacturers can increase the thickness of the faucet or add other metal materials, it can also make the faucet pick up more.†Consumers are advised to ask the sales staff for a test report of the product. If the test report says that the product is qualified, the problem is not serious. In addition, consumers should choose a more durable overall casting faucet. The sound of the overall cast faucet tapping is even more boring. Consumers can judge whether the faucet is cast as a whole by tapping on the faucet. Test water flow: rich and soft foam indicates better bubbler Consumers should choose a faucet with a bubbler as far as possible, and feel the water flow with their hands. The water flow is soft and foamy (water bubble content), indicating that the bubbler quality is better. The bubbler generally has six layers, usually consisting of a metal mesh cover (partly plastic). When the water passes through the mesh cover, it will be cut into a large number of tiny water columns with air interposed between them so that the water does not splash around. Recognize the brand: choose the brand after-sales service is more secure Finally, consumers should go to the formal market and supermarkets to purchase branded taps. Branded products have manufacturer's brand identity, and non-regular products or quality products are often only pasted with some paper labels, even without any mark. The faucet packing box should also have the manufacturer's brand identity, quality assurance and service card. Furniture brand water heater brand faucet decoration home TAISHAN CITY WANAN CABLE CO.,LTD , http://www.tswanan.com