Type of toilet

In terms of flushing, the toilets on the market today can be divided into two types: siphon and open flush (ie, straight flush). Relatively straight flush, the siphonic toilet is different in that it rushes on one side and has a siphon effect on one side, which can quickly discharge dirt. Among them, the siphon type is divided into flush type, eddy current type, jet type, front type and so on. Siphon vortex type and jet type are equipped with a special water inlet channel. The water in the water tank flows into the toilet under the water level, thus eliminating the noise generated when the water tank enters the water and impacting the air and falling water in the pipeline. This is also the current implementation of the “silent” Toilet."

Select toilet

When choosing a toilet, in addition to watching the flushing method, you also need to pay attention to "three look."

A look at the interior, in order to save costs, many toilets have no glazed return bends, while others use a small elastic, poor sealing performance of the pad. Such toilets are prone to scaling and clogging, and are also prone to leaking water. Therefore, when buying, put your hands into the toilet's dirt, and touch the inside to see if it is smooth. Secondly, look at the glaze. The surface of a good toilet is smooth, meticulous, and has no flaws. After repeated washing, it can still be smooth as new; Find out what kind of installation and warranty service you can accept to avoid inconvenience and disputes in the future.

Install toilet

After you buy a toilet with the same wall space and seal the cushion, you can start installing it. First, make the water outlet saw short, and make the water outlet as high as 2mm-5mm above the ground as far as conditions permit. Place the location of the toilet expansion bolt. Clean the site, and place the sealing cushion around the drain nozzle. Use cement pads). Then put the toilet's water outlet on the floor and place it gently on the ground. After confirming it is in place, you can test the water. If everything is fine, you're done.

Answering questions

Q: Which type of toilet flushes dirty things relatively clean?

A: Siphonic toilets are easy to wash away the dirt attached to the surface of the toilet. The advantage of flush-type toilets is that the diameter of the sewage pipeline is large, and large splashes are easy to flush. They have their own advantages and disadvantages.

Q: Is it flush-type or siphon-type water-saving?

A: Whether the toilet saves water is affected by two aspects: one is the water tank and the other is the bucket. Most of the European brands are straight flush, characterized by a short path to the flushing water pipeline and a thick diameter, which can be easily washed out by the water's gravitational acceleration. The siphon-type pipelines are tall, long and thin. Because the smaller the diameter, the more obvious the effect of siphoning, the greater the pumping force. As a result, the demand for water is high.

However, when a water-saving water tank is used, if it is equipped with a large-capacity water tank, it is useless. Therefore, attention should be paid to the cooperation of the water tank and the tank.

Q: What issues need to pay attention to when unpacking the toilet?

A: The toilet should undergo strict quality inspection before leaving the factory, such as testing water, visual appearance, etc. The products that can be sold on the market are generally qualified products, but you must check the goods in the face of the merchant and check whether it is There are obvious defects and bumps, and whether there are color differences in each part.

Q: Where does the hole pitch of the toilet come from?

A: From the wall to the radius of the launching water, pay attention to the number of holes after the wall tiles are attached, otherwise the tiling is not enough.

Q: After the toilet is installed, how can I know if I can use it?

Answer: Put a cigarette butt in the toilet and flush it. If you can wash the cigarette butt once, it shows that there are no problems in this toilet. This is an effective way for me to test the siphoning ability of toilets for many years. If not, you have to reinstall or find a supplier.

Q: The wall distance of my toilet is 400 (a type), but I bought 305. The salesperson asked me to use their shifter. Is this something easy to use?

A: If possible, try to return. It is not enough, 305's can also be fitted, is the distance from the wall will be 9cm, it is best not to shifter.

Q: I heard that toilets can only move up to 10cm. I want to move more points.

A: If you are happy to raise the toilet 12cm, it will be no problem moving to the center of the hall.

Furniture Brand Water Heater Brand Toilet Cement

Rod Seals

1. Components of piston rod seal:

Polyurethane, polyformaldehyde, rubber

2. Purpose and function of piston rod seal:

The rod seal belongs to the dynamic seal. It is the seal that moves with the piston rod. It is one of the important components on the hydraulic support.

3. Use position of piston rod seal:

Guide sleeve, piston

4. Working principle of piston rod seal:

It is used at the contact part between the guide sleeve and the outer cylinder to seal the emulsion in the outer cylinder.

5. What effects will be caused by improper use or operation of piston rod seal:

1. Improper selection of cavity support material will wear the cavity and piston rod.

2. The size of the friction pair is inappropriate, causing wear.

3. Improper thread guide angle of cylinder barrel and piston end wear the sealing ring.

4. The seal ring is worn due to improper installation guide angle of the seal.

5. The surface of cavity and piston rod is rough, with scratches and worn seals.

6. The outer cylinder leaks and the jack does not maintain pressure.

Piston Rod Seal,Hydraulic Cylinder Rod Seal,Pneumatic Rod Seal,U Ring Seals,Hydraulic Seals

DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com