How to paste wallpaper? Super detailed graphic tutorial allows you to easily learn

Many families use wallpapers for their renovations. Wallpapers look good, but it's not so easy for people to put them on. However, the wallpaper construction steps are not complicated, but only need some professional knowledge and patience. The following Xiao Bian will offer an ultra-detailed graphics and text tutorial to provide you with detailed wallpapering methods, and quickly learn it!

I. Precautions before construction

The construction of the wallpaper should be carried out after carpentry, painting, electrical, plastering, etc. Otherwise, due to large dust, easy to organic solvent contamination, it will affect the quality of wallpaper damage. The construction wall must be flat, clean, and uniform in color without delamination and dirt.

Second, wallpaper paving process:

After everything is ready, start construction!

★ First, prepare tools: roller, scraper, utility knife, tape measure, bucket; glue, mortar, base film.

Step 1: Pour the base film into a bucket and add the same amount of fresh water .

Step 2: Stir the base film.

Step 3: Put cardboard on it to protect it from contamination.

Step 4: Brush base film.

* Pay attention to safety when brushing the wall.

Step 5: Pour the powder into a bucket and add water to mix.

Step 6: Add special transparent glue for wallpaper.

Step 7: Stir the glue block.

Step 8: Measure the height and width of the wall.

Step 9: Measure wallpaper.

Step 10: Cut wallpaper.

Step 11: Spread the two wallpapers and the first pattern to the same size.

Step 12: Cut out the width of the wall. The pattern should be right.

Step 13: Apply glue to the wallpaper.

Step 14: Fold the brushed wallpaper and allow the glue to fully absorb it.

Step 15: Pull the wallpaper and lay it in order.

Step 16: Press the wallpaper with a scraper to scrape the excess glue.

Step 17: Press the scraper to cut off excess wallpaper.

The wallpaper is finished.

Third, wallpaper paste after the maintenance and maintenance

1. After the wallpaper is attached, close the doors and windows. Do not open the window within 24 hours and allow the wallpaper to dry slowly.

2. During the wet season, after the construction of the paving is completed, doors and windows should be opened during the day to prevent the invasion of moist gas.

3, the paper has a certain scrub resistance, so if stained, can be gently wiped with soap or other cleaning agent.

4, wallpaper with embossed pattern can be cleaned every 2-3 months with a vacuum cleaner. Simply use the chicken feathers for cleaning on weekdays.

5. Do not use a hard object such as a back or a desk to strike or rub against the wall to avoid damaging the wall. If damage to the surface of the small area is found, a color-approaching paint or paint remedy can be used.

6, when the wall needs to hang oil paintings or other accessories, should nail a nail on the wallpaper on a "V" shape for future repair.

Concluding remarks: The above is a detailed introduction on how to paste wallpaper and paste wallpapers. I believe that everyone has more understanding on the wallpapering steps. It is not difficult to paste wallpapers, but it is not an easy task. Your home is more beautiful, wallpaper is also necessary to get skills Oh!

Recommended reading:

>>> Decoration Expert Tips Wallpaper Paste Notes

>>> Qi Family Classroom: Wall Treatment before Wall Paper Construction

Wall construction wallpaper paving entrance decoration wallpaper wallpaper paint wallpaper

Chromium Alloy Casting Ball

The high chromium wear-resistant alloy steel balls produced by our company have the following advantages:

1. With extremely high hardness, usually between 60-66 HRC, it can effectively resist wear and grinding and extend service life.

2. Excellent wear resistance, able to maintain stable performance during high-speed grinding and grinding, reducing the risk of wear and fracture.

3. It has good impact resistance and can withstand greater impact force and is not easy to break during high-speed grinding and grinding.

4. It has good corrosion resistance, can maintain stable performance in wet and corrosive environment, and is not easy to rust and corrosion.

5. Can maintain stable performance in high temperature environment, not easy to deform and soften, suitable for high temperature grinding and grinding process.

6. The wear rate of the steel ball is low, which can reduce the loss of abrasives and materials and improve the grinding and grinding efficiency.

In short, the high chromium wear-resistant alloy steel balls produced by our company have the advantages of high hardness, strong wear resistance, good impact resistance, strong corrosion resistance, high temperature stability and low wear rate, and cooperate with many large companies to supply.

40 4

Chromium Alloy Casting Ball,Customized Steel Balls,Stone Grinding Tools,Casting Steel Balls

Xuzhou Surun wear-resistant material Co., LTD , https://www.suruntools.com