What are the common tile specifications for tile specifications?
Nowadays, there are many kinds of tiles on the market. When choosing, you have to choose according to the size of the room and personal preference. Tile specifications also determine tile prices to some extent. Many people in the purchase of tiles for the tile specifications are still not quite clear, the following Xiaobian to introduce everyone to common tile specifications knowledge, take a look at it Tile Specifications - by Use Brick There are generally 1200*600, 1000*1000, 800*800, 600*600, 400*400, 330*330, 300*300 Wall tiles There are generally 800 * 400 (processing bricks), 600 * 300, 300 * 450, 250 * 330, 165 * 165, 100 * 100 Glazed tiles Whole brick As the current interior design is more and more inclined to plain design, full-body bricks are becoming more and more fashionable and are widely used in renovation projects such as halls, aisles, and outdoor walkways. Generally 300mm × 300mm, 400mm × 400mm, 500mm × 500mm, 600mm × 600mm, 800mm × 800mm Glass tiles Mosaic tile Antique brick Calculate the number of tiles required by area ▼ The total number of tiles = tiles tile area (square meters) ÷ (the length of a single tile × the width of a single tile) The total number of sheets = 20 m 2 ÷ (0.12 m × 0.12 m) = 1388.9 (pieces) Note: When calculating the number of pieces, it should be noted that the units are uniform, so the length and width of the tiles should be converted from millimeters (mm) to meters (m). Algorithm 1: How many bricks per square are included × number of squares = [1 ÷ (0.12m * 0.12m) × (coefficient)] × 20 = ≈ 67 × 20 = 1340 (this algorithm is easy to play tricks) Mystery: The number of squares is correct, the number of sheets is less calculated, and the square charge is applied, but the number of bricks per square is rounded (some merchants will also get a conversion factor, or like the above-mentioned business makes a joint, claiming that the internal regulations come Play tricky Editor's summary: Understand the approximate price of the tile size and each tile size , and the cost of recalculating your own tiles is much easier. For more information on ceramic tiles, you can follow this site's information channel. Tile Tiles Tile Tiles
wire holder is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting the wine glass holder.
China leading manufacturers and suppliers of Wine glass holder,goblet Holder, and we are specialize in Wine Rack,Hanging Wine Rack, etc.
stainless steel goblet holder,goblet rack,Stainless steel goblet rack,wine glass holder,wine glass rack Shenzhen Lanejoy Technology Co.,LTD , https://www.baking-rack.com
Tile Specifications - by Material
Glazed tiles are tiles that have been glazed on the surface of the brick.
The surface is made by firing together with glaze. The main body is divided into clay and porcelain. The back of the clay is red and the back of the clay is gray.
The surface of the glazed tile can be made with various patterns and patterns, which is richer than the color and pattern of the polished tile. Because the surface is glaze, the wear resistance is not as good as that of the polished tile.
▶▶ Glazed tile specifications
The square glazed tiles have 152mm × 152mm, 200mm × 200mm; rectangular glazed tiles have 152mm × 200mm, 200mm × 300mm and other specifications;
Commonly used glazed tiles are 5mm and 6mm thick.
The surface of the bricks is not glazing, and the material and color of the front and back surfaces are the same, hence the name.
Whole brick is a kind of wear-resistant brick, although there are varieties such as osmotic brick, but relatively speaking, its color is less than glazed tile.
▶▶ Body brick specifications
Polished tiles
The polished brick is a bright brick that has been polished on the surface of the whole brick body and belongs to a kind of brick.
Compared to whole bricks, the surface of the polished tiles is much smoother. Polished tiles are hard and durable and are suitable for use in most indoor spaces except the restrooms and kitchens.
Polished bricks have a fatal flaw: they are dirty. This is caused by the uneven pores that the polished tile leaves during polishing. These pores can be filthy.
▶▶ Polished brick specifications
400mm×400mm, 500mm×500mm, 600mm×600mm, 800mm×800mm, 900mm×900mm
Vitrified tiles are actually full-tiles, and their surface is smooth but does not require polishing, so there is no problem of polishing the pores.
Vitrified tiles are a kind of reinforced polished tiles that are fired from high temperatures. The texture is harder and more wear-resistant than polished tiles.
There is no doubt that its price is also higher. Vitrified tiles are mainly floor tiles.
▶▶Vitrified tile specifications
400mm×400mm, 500mm×500mm, 600mm×600mm, 800mm×800mm
Mosaic is a brick with a special way of existence. It is generally composed of dozens of small bricks—a relatively large brick.
It is widely used in indoor small-scale floor, wall and outdoor size walls and floors with its small size and color.
▶▶ Mosaic Specifications
20mm x 20mm, 25mm x 25mm, 30mm x 30mm, thickness 4-4.3mm.
Antique bricks imitate the old style of the past and are essentially glazed porcelain bricks, attracting people's attention with a unique charm, reflecting the years of vicissitudes and history, the antique bricks through the style, color, pattern , creating a nostalgic atmosphere.
The antique brick is evolved from the color glaze brick. Compared with the ordinary glazed tile, the difference is mainly reflected in the color of the glaze, and the antique brick belongs to the common tile. The so-called antique, refers to the effect of bricks, tiles that should be called antique effects.
▶▶ Antique brick specifications
300×300MM, 400×400MM, 500×500MM, 600×600MM, 300×600MM, 800×800MM, and the like.
Tips: How to calculate tile usage
Such as: 20 square meters of 120 × 120mm specifications of a total of how many tiles to buy?
If the result of the calculation is a decimal, the decimal point is generally calculated using the “round up†method, ie, 1389 pieces, and another loss is required to purchase the tile.
Some black-hearted merchants will do tricks when calculating. Compared with the following calculation methods, the rough look is basically the same, and the intentions will be found in the heart:
Algorithm 2: tile paving area (square meters) ÷ (length of single tile × width of single tile) = 1389 pieces (reasonable algorithm)
The total number of tiles is unknowingly reduced. Although 1 level is not felt, the number of squares purchased is a lot, and it is a big loss for consumers.
Therefore, in the estimation of the price, you can estimate by square meters, but to implement the purchase of tiles, be sure to confirm the number of tablets and merchants can be, lest the business play tricks, unwittingly take away your money! 